waterjet-cutting-head0 pages

permalign® xp
cutting head
The Permalign® xP Cutting Head combined with the OmniJet® xP
achieves ultimate performance and reliability for abrasivejet
cutting. This patented design reduces the number of components,
minimizing overall maintenance and operational costs.
The Permalign® xP entrains dry abrasive into the high velocity
water stream within the mixing chamber. The resulting
mixture exits through the nozzle as a high velocity,
coherent abrasivejet stream capable of cutting virtually any
material.
The Permalign® xP Cutting Head, when used with the OmniJet® xP,
is rated for pressures up to 85,000 psi (5,900 bar), orifice sizes ranging from
0.003–0.016 in (0.076–0.406 mm), and nozzle sizes from 0.020–0.065 in (0.5081.651mm) ID. This flexibility allows handling of small intricate cuts as well as thick
cuts requiring higher abrasive and water flow rates. Nozzles constructed of either
extended-life composite carbide or tungsten carbide are available.
Consistent Alignment
The design of the Permalign® xP Cutting Head ensures consistent
alignment of the water stream and abrasive nozzle without
additional adjustments. The fixed location of the orifice and
nozzle provides a consistent tool center point for the cutting
stream.
Superior Performance
Orifice and nozzle replacement requires no additional adjustments and provides for superior stream alignment.
The Permalign® xP Cutting Head along with the OmniJet xP offers a lightweight, compact and versatile solution to your
abrasivejet cutting needs.
Specifications
• Length
• Weight
• Operating air pressure minimum
• Water pressure maximum
• Orifice range
• Nozzle range
10 in (254 mm) to 14 in (356 mm)
4 lb (1.8 kg)
80-100 psi (5.5–7 bar)
85,000 psi (5,900 bar)
0.003–0.016 in (0.076–0.406 mm)
0.020–0.065 in (0.508–1.651mm) ID
Rev. 7/2011
1
Specifications subject to change.
MADE IN THE
12070 43rd St. N.E. St. Michael, MN 55376 USA
www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com