PNEUMATIC LANCE WATERJETTING TOOL0 pages

pneumatic
lance
Jet Edge’s Pneumatic Lance is a powerful 55,000 psi (3800 bar)
hand-held waterjetting tool for cleaning and surface preparation
applications.
The ergonomically designed Pneumatic Lance uses pneumatic
triggers to turn the UHP water on and off. The remote UHP water
control assembly (tumble box) provides a freestanding interface
between the Pneumatic Lance and the air and water supply equipment. The assembly is a mounting platform for an air valve to
detect when the triggers are pressed and an ultra high pressure
water control valve to control the flow of UHP water.
The UHP water is extruded through an orifice to produce a concentrated stream. Compressed air from an external source is controlled
by the two triggers on the Pneumatic Lance. The air operates the
UHP water control valve to turn the UHP water on and off. Water
flow is initiated only when both triggers are pressed, acting as a
safety device to ensure both hands are on the equipment.
Specifications
Length
available
Width at handle
Weight
Air supply
Water supply
also suitable
Operating Pressure

48 in (1219 mm) standard, other lengths are
12 in (305 mm)
16 lb (7.3 kg)
Pressure - 90–95 psi (6.2–6.6 bar)
Flow - 30 cfm (850 L/m)
Portable tap water
(water that is suitable for the UHP pump is

powered by jet edge!

for the pneumatic lance)
55,000 psi (3900 bar) nominal

Rev. 6/2014

Options
• The pneumatic lance is available in dierent lengths. A specific
length can be ordered.
• Several styles of orifice mounts and manifolds provide a variety of
spray patterns.
• A tripod allows the pneumatic lance to be mounted to a stable
platform.

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

The Pneumatic Lance
is powered by a
Jet Edge waterjet
intensifier pump.
Model iP55-280DS

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com