IP60-150 WATERJET INTENSIFIER PUMP0 pages
ip60-150
intensifier pump
Construction
· Heavy gauge sheet metal covers
· Rugged all-steel welded framework
· Hinged cover and removable access panels for
convenient machine inspection and maintenance
· Integral hydraulic reservoir
· Sound insulated for quiet operation
· NEMA 12/13 rated electrical enclosure
Physical Size
· Length: 82 in (208 cm)
· Width: 56 in (142 cm)
· Height: 60 in (152 cm)
· Approximate Weight with Fluid: 4600 lbs (2090 kg)
Electric Motor
· Motor Output: 150 hp (112 kw)
· Motor Type: High Efficiency TEFC electric motor
· Full load amps @ 460vac: (60Hz) 177
· Full load amps @ 230vac: (60Hz) 354
Intensifier
· Type: Single piston, dual plunger, reciprocating
· Number of Intensifiers: two
· Operating Pressure: 55,000 psi (3800 bar)
· Intensification Ratio: 19:1
· Flow Rate: 3.0 gpm (11.4 L/min)
· Maximum Rated Orifice Size: .025 in (.64 mm)
Rev. 7/2014
Environmental
· Ambient Room Temperature: 50°-100°F (10°-37°C)
· Relative Humidity: Noncondensing, Maximum
95% @ 100°F
MADE IN THE
12070 43rd St. N.E. St. Michael, MN 55376 USA
Standard Features
· High efficiency TEFC motor
· 1,500 or 1,800 nominal motor speed (rpm)
· Electronically shifted intensifiers
· Wye-Delta soft start with disconnect
· 0.5 gallon (1.9 liter) high pressure attenuator with 1.45
micron filtration
· Safety shutdown systems
· Automatic safety pressure bleed-down valve
· Thermostatically controlled cooling system
· Programmable Logic Controller (PLC) for operation and safety
monitoring
· Axial piston, variable displacement, pressure-compensated
hydraulic pump
· Liquid-filled pressure gauges
· UHP safety shielded tubing
Optional Features
· CE Mark
Low-Pressure Water/Intensification Water
· Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
· Supply Requirements: 2.9 gpm @ 20 psi (1.4 bar )
min. / 75°F (24°C) max
· Filtration: 10, 1, .45 Micron
Coolant Water
· Maximum Temperature: 70°F (21°C)
· Minimum: 0-10.0 gpm (0-37.9 lpm) @ Minimum 60 psi (4.1 bar)
· Heat Exchanger: Stainless Steel Brazed Plate (1)
Hydraulics
· Reservoir Capacity: 85 gal (322 L)
· Filtration: Kidney Loop 10 Micron
(50hz = 23.5 GPM oil; 60Hz = 28 GPM oil)
www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com