IP60-100 WATERJET INTENSIFIER PUMP0 pages

ip60-100
intensifier pump
Construction

· Heavy gauge sheet metal covers
· Rugged all-steel welded framework
· Hinged cover and removable access panels for
convenient machine inspection and maintenance
· Integral hydraulic reservoir
· Optional Sound Insulation Package
· NEMA 12/13 rated electrical enclosure

Standard Features

· High efficiency TEFC motor
· 1,500 or 1,800 nominal motor speed (rpm)
· Wye-Delta soft start with disconnect
· Programmable Logic Controller (PLC) for operation
and diagnostics
· Electronically shifted intensifiers
· Safety shutdown systems
· Automatic safety pressure bleed-down valve
· Axial piston, variable displacement,
pressure-compensated hydraulic pump
· Thermostatically controlled cooling system
· 0.5 gallon (1.9 liter) high pressure attenuator
· In-line UHP Water Filter to 5 Micron
· UHP safety shielded tubing
· Liquid-filled pressure gauges

Optional Features
· CE Mark

Low-Pressure Water/Intensification Water
· Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
· Supply Requirements: 4.0 gpm @ 20 psi (1.4 bar )
min. / 75°F (24°C) max
· Filtration: 10, 1, .45 Micron

Physical Size

· Length: 86 in (218 cm)
· Width: 40 in (102 cm)
· Height: 55 in (140 cm)
· Approximate Weight with Fluid: 4,600 lbs. (2087 kg)

Electric Motor

Coolant Water
· Maximum Temperature: 70°F (21°C)
· Minimum: 10.0 gpm (0-37.9 lpm) @ Minimum 30 psi (2.1 bar)
· Ability to Remove: 97,000 BTU’s/hour
· Heat Exchanger: Brazed Plate

· Motor Output: 100 hp (75 kw)
· Motor Type: High Efficiency TEFC electric motor
· Full load amps @ 460vac: (60Hz) 119
· Full load amps @ 230vac: (60Hz) 238
· Full load amps @ 380vac (50Hz) 147

Intensifier

Hydraulics
· Reservoir Capacity: 60 gallons (230 liters)
· Filtration: 10 Micron
· Bladder type accumulators

Rev. 7/2014

· Type: Single piston, dual plunger, reciprocating
· Number of Intensifiers: two
· Operating Pressure: 55,000 psi (3800 bar)
· Intensification Ratio: 20:1 (19:1 at 50Hz)
· Flow Rate: 2.0 gpm (7.6 lpm)
· Maximum Rated Orifice Size: .021 in (0.53 mm)

Environmental
· Ambient Room Temperature: 50°-100°F (10°-37°C)
· Relative Humidity: Noncondensing, Maximum 95% @ 100°F

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com