P60-100-waterjet0 pages

"

WATERJET SYSTEMS

nnnn

Construction

nnnn

• Heavy gauge sheet metal covers

nnnn

• Rugged all-steel welded framework

nnnn

• Hinged cover and removable access panels for

nnnn

convenient machine inspection and maintenance

nnnn

• Integral hydraulic reservoir

nnnn

• Optional Sound Insulation Package

nnnn

• NEMA 12/13 rated electrical enclosure

nnnn

Standard Features

nnnn

• High efficiency TEFC motor

nnnn

• 1,500 or 1,800 nominal motor speed (rpm)

nnnn

• Wye-Delta soft start with disconnect

nnnn

• Programmable Logic Controller (PLC) for operation

nnnn

and diagnostics

nnnn

• Electronically shifted intensifies

nnnn

• Safety shutdown systems

nnnn

• Automatic safety pressure bleed-down valve

nnnn

• Axial piston, variable displacement,

nnnn

pressure-compensated hydraulic pump

nnnn

•Thermostatically controlled cooling system

nnnn

• 0.5 gallon (1.9 liter) high pressure attenuator

nnnn

• In-line UHP Water Filter to 5 Micron

nnnn

• UHP safety shielded tubing

nnnn

• Liquid-filled pressure gauges

nnnn

Physical Size

nnnn

• Length: 86 in (218 cm)

nnnn

•Width:40in (102cm)

nnnn

•Height: 55 in (140 cm)

nnnn

• Approximate Weight with Fluid: 4,600 lbs. (2087 kg)

nnnn

Electric Motor

nnnn

• Motor Output: 100 hp (75 kw)

nnnn

• Motor Type: High Efficiency TEFC electric motor

nnnn

• Full load amps @ 460vac: (60Hz) 119

nnnn

• Full load amps @ 230vac: (60Hz) 238

nnnn

• Full load amps @ 380vac (50Hz) 147

nnnn

Intensifier

nnnn

•Type: Single piston, dual plunger, reciprocating

nnnn

• Number of Intensifies: two

nnnn

• Rated Pressure: 60,000 psi (4,100 bar)

nnnn

• Intensification Ratio: 20:1 (19:1 at 50Hz)

nnnn

• Flow Rate: 2.0 gpm (7.6 Ipm)

nnnn

• Maximum Rated Orifice Size: .021 in (0.53 mm)

nnnn

IP60-100

nnnn

INTENSIFIER PUMP

nnnn

Low-Pressure Water/Intensification Water

nnnn

•Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM

nnnn

• Supply Requirements: 4.0 gpm @ 20 psi (1.4 bar)

nnnn

min./75°F(24°C) max

nnnn

•Filtration: 10,1,.45 Micron

nnnn

Coolant Water

nnnn

• Maximum Temperature: 70°F (21°C)

nnnn

• Minimum: 10.0 gpm (0-37.9 Ipm) @ Minimum 30 psi (2.1 bar)

nnnn

• Ability to Remove: 97,000 BTU's/hour

nnnn

• Heat Exchanger: Brazed Plate

nnnn

Hydraulics

nnnn

• Reservoir Capacity: 60 gallons (230 liters)

nnnn

• Filtration: 10 Micron

nnnn

• Bladder type accumulators

nnnn

Environmental

nnnn

•Ambient Room Temperature: 50°-100°F (10°-37°C)

nnnn

Relative Humidity: Noncondensing, Maximum 95% <

nnnn

100°F

nnnn

MADE INTHE

nnnn

Specifications subject to change.

nnnn

□| www.jetedge.com

nnnn

+1-763-497-8700| 1-800-JET-EDGE

nnnn

£| sales@jetedge.com

nnnn

& 12070 43rd St. N.E. St. Michael, MN 55376 USA

"