IP36-100 WATERJET INTENSIFIER PUMP0 pages

model ip36-100
iP36-50
intensifier pump
intensifier pump
The 100-horsepower Jet Edge iP36-100 Mobile Intensifer Pump is
capable of producing adjustable output pressures from 5,000 to 36,000
psi (345 to 2,800 bar), and flow rates from 0 to 3.8 gallons (0 to 14.38
liters) per minute
The iP36-100 utilizes a pressure-compensated hydraulic system to drive
plunger style intensifiers. The use of hydraulic fluid power provides
smooth flowing UHP water resulting in long system life. Reliable and
precise control of the electronically shifted intensifiers ensures superior
performance standards with reduced operating costs. The iP36-100
water jet pump is built on a skid-mounted frame with lifting eyes and
forklift guides provided for increased mobility.

Physical Size
L ength: 96 in (224 cm)
Width: 37 in (94 cm)
Height: 60 in (152 cm)
Approximate weight with fluid: 4,600 lbs (2,087 kg)
Electric Motor
Motor output: 100 hp (75 kw)
Motor type: High efficiency TE FC electric motor
Full load amps @ 460 VAC (60 Hz) 119
Full load amps @ 230 VAC (60 Hz) 238
Full load amps @ 380 VAC (50 Hz) 145
Intensifier
Type: Single piston, dual plunger, reciprocating
Number of intensifiers: 2
Nominal output pressure: 36,000 psi (2,500 bar)
Intensification ratio: 12:1
Flow rate: 3.8 gpm (14.38 lpm)

Coolant Water
Maximum temperature: 70° F (21° C)
Minimum supply: 4 gpm (15.1 L/min)
Ability to remove: 81,000 BTU’s / HR
Hydraulics
Reservoir Capacity: 104 gal (394 L)
Filtration: Full Flow 10 Micron
Environmental
Ambient Room Temperature 50° -100°F (10° -37°C)
Relative Humidity Noncondensing, Maximum 95% @ 100°F
Optional CE Mark Available

Rev. 12/19/2013
Rev. 6/2014

Low-Pressure Water
Type Pretreated, <100 TDS, PH 6-8, Silica <15 PPM
Supply requirements: 20 psi
Filtration: On board, 1 micron

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com