SPYDER ABRASIVEJET LINEAR AND PIPE CUTTING SYSTEM0 pages

spyder
abrasivejet
cutting system
A Cut Above
Suitable for any environment:
• Cuts virtually any material without heat or flames
• Pneumatic reversible drive motor
• Non-ferrous motion components
Movement Speed:
Varies due to several ranges of gear reducers
Track Options:
• 3, 5 and 10 linear-foot tracks
• Low profile, rigid and vacuum tracks available
• Pipe track: 6–60 inches (152–1524 mm)
Optional Radius & Circle Cutting Fixture:
• 1”-6.5” insider diameter/16“-48” outside diameter
• 3“-12.5” inside diameter/27.5“-56” outside diameter
Spyder Control Station
• Three-position directional valve for pneumatic drive unit
• Dual air regulators for directional speed control
• Control abrasive flow from console
• One palm button shuts o UHP water and abrasive
Spyder Vacuum Generator
• Steel construction
• Pneumatic control vacuum
• Locking quick disconnects
• Lightweight compact design
Spyder Head Manipulator
• Drive unit adapts for use with track or pipe cutting bands
• Pneumatic reversible drive motor with interchangeable gear drive
• Precise speed control for accurate cutting feed rates
• Center line mounting of abrasive cutting head
• Adjustable angle for beveling cuts
Permalign II Abrasive Head
Length
10.94 in (27.8 cm)
Weight
4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max)
60,000 psi (4100 bar)
Orifice range
.005 - .021 in (.127 - .53 mm)
Nozzle range
.020 - .065 ID (.508 - 1.65 mm)
Max flow rate
2.1 gpm (7.95 lpm)

Jet Edge’s Spyder Abrasivejet Cutting System is a portable linear and pipe
cutting system designed for use in remote and/or potentially hazardous
environments. It is ideal for cutting pipelines, steel reinforced concrete, reactor
vessels and fabricated metal structures. The Spyder is a pneumatically
controlled mobile waterjet system that moves along rigid, flexible or pipe
tracks. Its abrasivejet cutting head can be angled for beveling cuts. An optional
radius/circle fixture can be added for increased versatility.

High Flow Abrasive Head (for cutting thicker
material or multiple layers)
Length
7.55 in (19.1 cm)
Weight
4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max)
45,000 psi (3100 bar)
Orifice range
.020 - .036 in (.51 - .91 mm)
Nozzle range
.095 - .125 ID (2.41 - 3.18 mm)
Max flow rate
5.1 gpm (19.04 lpm)

powered by jet edge!

Spyder Abrasive Delivery System
• Lightweight durable high-impact poly design
• Two-wheel pneumatic tires with rigged frame
• Air-regulated metering valve
• Delivery rate: up to 3 lb (1.36 kg)/minute

The Spyder
is powered by a
Jet Edge waterjet
intensifier pump.
Model iP55-280DS

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

ne 2011

Rev. 6/2014

Specifications subject to change.

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com