iP60-50R Water Jet Intensifier Pump - Redundant Intensifier0 pages
WATERJET SYSTEMS
IP60-B0R
INTENSIFIER PUMP
Low-Pressure Water/Intensification Water
•Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM
• Supply Requirements: 1.0 gpm @ 40 psi (3 bar)
min./70°F (21 °C) max.
• Filtration: 1, .45 Micron
Coolant Water
• Maximum Temperature: 70°F (2TC)
•Minimum:0-4.0gpm (0-15.1 Ipm) @
Minimum 20 psi (1.3 bar)
• Ability to Remove: 25,000 BTUs /Hour
Hydraulics
• Reservoir Capacity: 35 gallons (132 liters)
• Filtration: Full Flow 10 Micron
Environmental
• Ambient Room Temperature: 50°-95°F (10°-35°C)
• Relative Humidity: Non-condensing,
Maximum 95% @ 100°F
Construction
• Heavy gauge sheet metal covers
• Rugged all-steel welded framework
• Hinged cover and removable access panels for
convenient machine inspection and maintenance
• Integral hydraulic reservoir
• Sound insulated for quiet operation (optional)
• NEMA 12/13 rated electrical enclosure
Standard Features
• High efficiencyTEFC motor
• Electronically shifted intensifiers
• Wye-Delta soft start with disconnect
• 0.5 gallon (1.9 liter) high pressure attenuator with
filtration to .45 micron
• Safety shutdown systems
• Automatic safety pressure bleed-down valve
•Thermostatically controlled cooling system
• Dual pressure set points
• Programmable Logic Controller (PLC) for operation and safety monitoring
• Axial piston, variable displacement, pressure-compensated hydraulic pump
• Liquid filled pressure gauges
• UHP safety shielded tubing
Physical Size
•Length: 72 in (1,830 mm)
•Width: 32 in (820 mm)
•Height: 53 in (1,350 mm)
• Approximate Weight with Fluid: 2,500 lbs. (1,134 kg)
Electric Motor
• Motor Output: 50 hp (37 kw)
• Motor Type: High Efficiency TEFC electric motor
• Full load amps @ 460vac (60Hz): 58
• Full load amps @ 230vac (60Hz): 116
• Full load amps @ 380vac (50Hz): 71
Intensifier
•Type: Single piston, dual plunger, reciprocating
• Number of Intensifiers: two
• Rate Pressure: 60,000 psi (4,100 bar)
• Intensification Ratio: 20:1
• Flow Rate: 1 gpm (3.8 Ipm)
Maximum Rated Orifice Size .015 in (.38 mm)
Specifications subject to change.
MADE INTHE
www.jetedge.com
+1-763-497-8700| 1-800-JET-EDGE
sales@jetedge.com
SL 12070 43rd St. N.E. St. Michael, MN 55376 USA
"