IP60-50 WATERJET INTENSIFIER PUMP0 pages

ip60-50
intensifier pump

Construction

· Heavy gauge sheet metal covers
· Rugged all-steel welded framework
· All stainless steel fittings and components
· Hinged cover and removable access panels for
convenient machine inspection and maintenance
· Integral hydraulic reservoir
· NEMA 12/13 rated electrical enclosure
· UL Certified electrical panel
· Optional sound insulation

Standard Features

· High efficiency TEFC motor
· Electronically shifted intensifiers
· Wye-Delta motor starter assembly
· 1 quart (0.9 liter) high pressure attenuator
· Safety shutdown systems
· Automatic safety pressure bleed-down valve
· Integrated power distributor panel with disconnect
· Thermostatically controlled kidney loop cooling system
· Dual pressure set points
· Programmable Logic Controller (PLC) for operation and safety monitoring
· Axial piston, variable displacement, pressure-compensated hydraulic pump
· Hydraulic accumulator dampens pulsations
· Liquid filled pressure gauges
· UHP safety shielded tubing

Optional Features
· CE Mark

Low-Pressure Water/Intensification Water

Physical Size

· Length: 72 in (1,830 mm)
· Width: 32 in (820 mm)
· Height: 53 in (1,350 mm)
· Approximate Weight with Fluid: 2,500 lbs. (1,134 kg)

· Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
· Supply Requirements: 1.0 gpm @ 40 psi (3 bar )
min. / 70°F (21°C) max.
· Water Pre-filter to 0.45 Micron
· In-line UHP Water Filtration to 5 Micron

Electric Motor

Coolant Water

· Motor Output: 50 hp (37 kw)
· Motor Type: High Efficiency TEFC electric motor
· Full load amps @ 460vac (60Hz): 58
· Full load amps @ 230vac (60Hz): 116
· Full load amps @ 380vac (50Hz): 71

· Maximum Temperature: 70°F (21°C)
· Minimum: 4.0 gpm (15.1 lpm) @ Minimum 20 psi (1.3 bar)
· External Chiller Required: 34,000 BTU/hour minimum
· Heat Exchanger: Brazed Plate

Hydraulics

Intensifier

· Reservoir Capacity: 35 gallons (209 liters)
· Filtration: 10 Micron

Rev. 7/2014

· Type: Single piston, dual plunger, reciprocating
· Number of Intensifiers: one
· Operating Pressure: 55,000 psi (3800 bar)
· Intensification Ratio: 20:1
· Flow Rate: 1.1 gpm (4.16 lpm)
· Maximum Rated Orifice Size .015 in (.38 mm)

Environmental

· Ambient Room Temperature: 50°-95°F (10°-35°C)
· Relative Humidity: Non-condensing, Maximum 95% @ 100°F

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com