water-jet-pumps-iP55-2000 pages
® ABOVE
nnnnMADE INTHE
nnnnModel iP55-200 Intensifier Pump
nnnnConstruction
nnnn• Heavy gauge sheet metal covers
nnnn• Rugged all-steel welded framework
nnnn• Hinged cover and removable access panels for
nnnnconvenient machine inspection and maintenance
nnnn• Integral hydraulic reservoir
nnnn• Sound insulated for quiet operation
nnnn• NEMA 12/13 rated electrical enclosure
nnnnStandard Features
nnnn• High efficiency TEFC motor
nnnn• 1,500 or 1,800 nominal motor speed (rpm)
nnnn• Electronically shifted intensifiers
nnnn• Wye-Delta soft start with disconnect
nnnn• 0.5 gallon (1.9 liter) high pressure attenuator with 1.45
nnnnmicron filtration
nnnn• Safety shutdown systems
nnnn• Automatic safety pressure bleed-down valve
nnnn• Thermostatically controlled cooling system
nnnn• Programmable Logic Controller (PLC) for operation and safety monitoring
nnnn• Axial piston, variable displacement, pressure-compensated hydraulic pump
nnnn• Liquid-filled pressure gauges
nnnn• UHP safety shielded tubing
nnnnPhysical Size
nnnn• Length: 92 in (233 cm)
nnnn•Width:57in(145 cm)
nnnn• Height:61 in (155 cm)
nnnn• Approximate Weight with Fluid: 6,200 lbs. (2,812 kg)
nnnnElectric Motor
nnnn• Motor Output: 200 hp (149 kw)
nnnn• Motor Type: High Efficiency TEFC electric motor
nnnn• Full load amps @ 460vac (60Hz): 233
nnnn• Full load amps @ 230vac (60Hz):466
nnnn• Full load amps @ 380vac (50Hz):280
nnnnIntensifier
nnnn• Type: Single piston, dual plunger, reciprocating
nnnn• Number of Intensifiers: two
nnnn• Rated Pressure: 60,000 psi (4,100 bar)
nnnn• Intensification Ratio: 19:1
nnnn• Flow Rate:4.0 gpm (15.2 Ipm)
nnnn• Maximum Rated Orifice Size .028 in (.71 mm)
nnnnLow-Pressure Water/Intensification Water
nnnn•Type:Pretreated,<100TDS,PH 6-8, Silica <15 PPM
nnnn• Supply Requirements:4.0 gpm @ 20 psi (1.4 bar)
nnnnmin./75°F (24°C) max.
nnnn• Filtration: 10,1,.5 Micron
nnnnCoolant Water
nnnn• Maximum Temperature: 70°F (21 °C)
nnnn• Minimum: 0-15.0 gpm (0-56.7 Ipm) @ 20 psi (1.3 bar)
nnnn• Ability to Remove: 175,000 BTUs/Hour
nnnn• Heat Exchanger: Shell and Tube (2)
nnnnHydraulics
nnnn• Reservoir Capacity: 95 gallons (361 liters)
nnnn• Filtration: Full Flow 10 Micron
nnnnEnvironmental
nnnn• Ambient Room Temperature: 50°-100°F (10°-37°C)
nnnn• Relative Humidity: Noncondensing,Maximum 95% @ 100°F
nnnnRev. 12/1/08
nnnnSpecifications Subject to Change
nnnn1.800JET.EDGE www.jetedge.com sales@jetedge.com
"