90,000 PSI X-Stream xp90-50 Waterjet Intensifier Pump0 pages
xp90-50
intensifier pump
Construction
· Heavy gauge sheet metal covers
· Rugged all-steel welded framework
· Hinged cover and removable access panels for
convenient machine inspection and maintenance
· Integral hydraulic reservoir
· Sound insulated for quiet operation
· NEMA 12/13 rated electrical enclosure
Standard Features
· High efficiency TEFC motor
· Electronically shifted intensifiers
· Wye-Delta soft start with disconnect
· 0.5 gallon (1.9 liter) high pressure attenuator with
filtration to .45 micron
· Safety shutdown systems
· Automatic safety pressure bleed-down valve
· Thermostatically controlled cooling system
· Dual pressure set points
· Programmable Logic Controller (PLC) for operation and safety monitoring
· Axial piston, variable displacement, pressure-compensated hydraulic pump
· Liquid filled pressure gauges
· UHP safety shielded tubing
Physical Size
· Length: 72 in (1,830 mm)
· Width: 32 in (820 mm)
· Height: 53 in (1, 350 mm)
· Approximate Weight with Fluid: 2,700 lbs. (1,230 kg)
Low-Pressure Water/Intensification Water
· Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
· Supply Requirements: 2.0 gpm @ 40 psi (3 bar )
min. / 70°F (21°C) max.
· Filtration: 1, .45 Micron
Electric Motor
· Motor Output: 50 hp (37 kw)
· Motor Type: High Efficiency TEFC electric motor
· Full load amps @ 460vac (60Hz): 58
· Full load amps @ 230vac (60Hz): 116
· Full load amps @ 380vac (50Hz): 71
Coolant Water
· Maximum Temperature: 70°F (21°C)
· Minimum: 2.5 gpm (9.5 lpm) @ Minimum 20 psi (1.3 bar)
· Ability to Remove: 39,000 BTUs /Hour
· Cooling Circuit: Kidney Loop
Hydraulics
· Reservoir Capacity: 45 gallons (170 liters)
· Filtration: 10 Micron
· Cooling: Brazed Plate Heat Exchanger Water/Oil
· Optional Cooling: Exchanger: Air/Oil
Intensifier
· Type: Single piston, dual plunger, reciprocating
· Number of Intensifiers: one
· Rated Pressure: 90,000 static psi (6,200 bar)
· Intensification Ratio: 25:1
· Flow Rate: 0.7 gpm (2.61 lpm)
· Maximum Rated Orifice Size .011 in (.28mm)
· 100,000 PSI-rated fittings and tubing
· Supports 75K+ continuous operating pressure
Environmental
· Ambient Room Temperature: 50°-95°F (10°-35°C)
· Relative Humidity: Non-condensing, Maximum 95% @ 100°F
Rev. 4/2012
Specifications subject to change.
MADE IN THE
12070 43rd St. N.E. St. Michael, MN 55376 USA
www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com