garnet-removal-system-cyclone0 pages
WATERJET SYSTEMS
nnnnCYCLONE
nnnnABRASIVE
nnnnREMOVAL SYSTEM
nnnnWaterjet Cyclone Specifications
nnnn• 1 yard hopper and 1 yard abrasive bags.
nnnn• Standard outlet electrical supply.
nnnn• Shop air supply, 80-90 psi, 14 cfm at 85 psi.
nnnn• 60 gpm maximum water flow rate.
nnnn• Only 25 sq. ft. required floor space.
nnnn• Removes up to 10 lbs of abrasive per minute.
nnnn• Gravity-return overflow from the abrasive holding tank.
nnnnAdvantages
nnnn• Cleaner and easier than shoveling out your tank.
nnnn• Operates unattended.
nnnn• Full abrasive bags are removed and handled by a forklift.
nnnn• Less expensive than pumping or shoveling out your tank.
nnnn• No machine down-time required to remove abrasive.
nnnn• Can be custom sized for use on any waterjet tank.
nnnn• Very low maintenance costs.
nnnn• Two accessible check valves are the only moving parts that
nnnncome into contact with the abrasive slurry.
nnnn• Easy to set up and operate.
nnnnOptions
nnnn• Use attachments to remove abrasives from a waterjet tank that is already full.
nnnn• Install an agitation and suction plumbing system in an empty catch tank to keep it clean and keep up with
nnnnabrasive use.
nnnnMADE INTHE
nnnnSpecifications subject to change.
nnnnwww.jetedge.com
nnnn+1-763-497-8700| 1-800-JET-EDGE
nnnnsales@jetedge.com
nnnnSL 12070 43rd St. N.E. St. Michael, MN 55376 USA
"