90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump0 pages

xP90-100
intensifier pump
Construction

· Heavy gauge sheet metal covers
· Rugged all-steel welded framework
· Hinged cover and removable access panels for
convenient machine inspection and maintenance
· Integral hydraulic reservoir
· Sound insulated for quiet operation
· NEMA 12/13 rated electrical enclosure

Standard Features

· High effciency TEFC motor
· 1,500 or 1,800 nominal motor speed (rpm)
· Electronically shifted intensifiers
· Wye-Delta soft start with disconnect
· Fail-safe high-pressure attenuator
· Safety shutdown systems
· Automatic safety pressure bleed-down valve
· Thermostatically controlled cooling system
· Programmable Logic Controller (PLC) for operation and safety monitoring
· Axial piston, variable displacement, pressure-compensated hydraulic pump
· Liquid-filled pressure gauges
· UHP safety shielded tubing

Physical Size

Low-Pressure Water/Intensification Water
· Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
· Supply Requirements: 2.0 gpm @ 40 psi (3 bar )
min. / 70°F (21°C) max
· Filtration: 10, 1, .45 Micron

Electric Motor

Coolant Water
· Maximum Temperature: 70°F (21°C)
· Minimum: 4.8 gpm (18.2 lpm) @ Minimum 20 psi (1.3 bar)
· Ability to Remove: 95,000 BTUs /Hour
· Cooling Circuit: Kidney Loop

Intensifier

Hydraulics
· Reservoir Capacity: 60 gallons (230 liters)
· Filtration: 10 Micron
· Cooling: Brazed Plate Heat Exchanger Water/Oil
· Optional Cooling: Exchanger: Air/Oil

· Length: 86 in (218 cm)
· Width: 40 in (102 cm)
· Height: 55 in (140 cm)
· Approximate Weight with Fluid: 4,900 lbs. (2,222 kg)

· Motor Output: 100 hp (75 kw)
· Motor Type: High Efficiency TEFC electric motor
· Full load amps @ 460vac: (60Hz) 119
· Full load amps @ 230vac: (60Hz) 238

Rev. 4/2012

· Type: Single piston, dual plunger, reciprocating
· Number of Intensifers: Two
· Rated Pressure: 90,000 static psi (6,200 bar)
· Intensification Ratio: 25:1
· Flow Rate: 1.45 gpm (5.49 lpm)
· Maximum Rated Orifice Size: 0.017” (0.43mm)
· 100,000 PSI-rated fittings and tubing
· Supports 75K+ continuous operating pressure

Environmental
· Ambient Room Temperature: 50°-95°F (10°-35°C)
· Relative Humidity: Non-condensing, Maximum 95% @ 100°F

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com