waterjet-pump-xp-90-5010 pages

"

WATERJET SYSTEMS

nnnn

XP90-50

nnnn

INTENSIFIER PUMP

nnnn

Construction

nnnn

• Heavy gauge sheet metal covers

nnnn

• Rugged all-steel welded framework

nnnn

• Hinged cover and removable access panels for

nnnn

convenient machine inspection and maintenance

nnnn

• Integral hydraulic reservoir

nnnn

• Sound insulated for quiet operation

nnnn

• NEMA 12/13 rated electrical enclosure

nnnn

Standard Features

nnnn

• High efficiency TEFC motor

nnnn

• Electronically shifted intensifies

nnnn

• Wye-Delta soft start with disconnect

nnnn

• 0.5 gallon (1.9 liter) high pressure attenuator with

nnnn

filtration to .45 micron

nnnn

• Safety shutdown systems

nnnn

• Automatic safety pressure bleed-down valve

nnnn

•Thermostatically controlled cooling system

nnnn

• Dual pressure set points

nnnn

• Programmable Logic Controller (PLC) for operation and safety mon

nnnn

• Axial piston, variable displacement, pressure-compensated hydrau

nnnn

• Liquid filled pressure gauges

nnnn

• UHP safety shielded tubing

nnnn

itoring

nnnn

lie pump

nnnn

Physical Size

nnnn

•Length: 72 in (1,830 mm)

nnnn

•Width: 32 in (820 mm)

nnnn

•Height: 53 in (1,350 mm)

nnnn

• Approximate Weight with Fluid: 2,700 lbs. (1,230 kg)

nnnn

Electric Motor

nnnn

• Motor Output: 50 hp (37 kw)

nnnn

• Motor Type: High Efficiency TEFC electric motor

nnnn

• Full load amps @ 460vac (60Hz): 58

nnnn

• Full load amps @ 230vac (60Hz): 116

nnnn

• Full load amps @ 380vac (50Hz): 71

nnnn

Intensifier

nnnn

•Type: Single piston, dual plunger, reciprocating

nnnn

• Number of Intensifies: one

nnnn

• Rated Pressure: 90,000 static psi (6,200 bar)

nnnn

• Intensification Ratio: 25:1

nnnn

• Flow Rate: 0.7 gpm (2.61 Ipm)

nnnn

• Maximum Rated Orifice Size .011 in (.28mm)

nnnn

• 100,000 PSI-rated fittings and tubing

nnnn

• Supports 75K+continuous operating pressure

nnnn

Low-Pressure Water/Intensification Water

nnnn

•Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM

nnnn

• Supply Requirements: 2.0 gpm @ 40 psi (3 bar)

nnnn

min./70°F (21°C) max.

nnnn

• Filtration: 1, .45 Micron

nnnn

Coolant Water

nnnn

• Maximum Temperature: 70°F (21°C)

nnnn

• Minimum: 2.5 gpm (9.5 Ipm) @ Minimum 20 psi (1.3 bar)

nnnn

• Ability to Remove: 39,000 BTUs /Hour

nnnn

• Cooling Circuit: Kidney Loop

nnnn

Hydraulics

nnnn

• Reservoir Capacity: 45 gallons (170 liters)

nnnn

• Filtration: 10 Micron

nnnn

• Cooling: Brazed Plate Heat Exchanger Water/Oil

nnnn

• Optional Cooling: Exchanger: Air/Oil

nnnn

Environmental

nnnn

• Ambient Room Temperature: 50°-95°F (10°-35°C)

nnnn

• Relative Humidity: Non-condensing, Maximum 95% @ 100°F

nnnn

MADE INTHE

nnnn

Specifications subject to change.

nnnn

gj www.jetedge.com

nnnn

+1 -763-497-8700 | 1 -800-JET-EDGE

nnnn

sales@jetedge.com

nnnn

SL 12070 43rd St. N.E. St. Michael, MN 55376 USA

"