Ultra Lancing Machine - Rotary Waterjet Tool0 pages
Ultra Lancing
Machine
The Jet Edge Ultra Lancing Machine is a rotary-powered tool that utilizes ultra-high pressure (UHP) waterjets to effectively
remove deposits and blockages from interior surfaces of tubular structures such as heat exchangers and pipes. The precisely
controlled insertion, retraction and rotation speeds result in a perfectly cleaned inner surface.
The Ultra Lancing Machine is powered by a Jet Edge UHP intensifier pump that supplies 36,000 psi (2,500 bar) water to a
0-1500 rpm rotary swivel that transfers UHP water into the rotating lance. The lance advances into the tube using a variable
speed air vane motor. The UHP waterjet stream exits through the small orifices in the nozzle tip. The nozzle tip can be continuously rotated requiring few jets to completely cover the surface. A wide selection of standard tips in a variety of jet patterns
facilitate debris removal and flushing are available.
The system uses efficient water blasting techniques, allowing the operator to stay away from the UHP waterjet stream, and
requires less manpower than alternative methods. Elimination of product splash back reduces fatigue, resulting in a safer, more
alert crew. The low volume of UHP water produces better cleaning results with less waste disposal than alternative methods.
Construction
· Extruded lightweight, high-strength alloys and rugged steel
Rev. 7/2011
1
Standard Features
· Single lance model
· Extruded main carriage
· Steel support frame (bolt together)
· Adjustable standoff bars with clamps
· Manual Unidex XY positioning
· Operator control stand
· Fail safe pneumatic water on/off valve
· Pneumatic rotation & drive motors
· Options:
· Dual lance configuration
· Various manifold configurations & diameters
· Selection of orifice sizes
· Customized stroke lengths
· Rail extensions
· Pneumatic Unidex XY positioning
Specifications
Operating pressure
Overall length
36,000 psi (2500 bar)
26 ft (7.93 m)
(Additional rail extensions may be added)
Rail length
25 ft (7.62 m)
Stroke length
23 ft (7 m)
Rotation speed
0-1500 RPM
Maximum travel speed
2 ft/sec. (.61 m/sec.)
Weight
250 lbs (112.5 kg)
Width
11 in (28 cm)
Air supply
50 CFM at 90 psi (1416 lpm at 6.3 kg/cm2)
Minimum tube inside diameter 3/8 in (0.95 cm)
MADE IN THE
12070 43rd St. N.E. St. Michael, MN 55376 USA
www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com