Abrasivejet Circle & Radius Cutting System - Spyder0 pages

spyder abrasivejet
circle & radius
cutting system
A Cut Above
Suitable for any environment:
• Cuts virtually any material without heat or flames
• Pneumatic reversible drive motor
• Non-ferrous motion components
Easy Set Up:
• Self-aligning
• Lighweight suction cup mount
Available in two sizes:
• 1”-6.5” insider diameter/16“-48” outside diameter
• 3“-12.5” inside diameter/27.5“-56” outside diameter
Movement Speed:
Varies due to several ranges of gear reducers
Optional Linear and Pipe Cutting Tracks:
• 3, 5 and 10 linear-foot tracks
• Low profile, rigid and vacuum tracks available
• Pipe track: 6–60 inches (152–1524 mm)
Master Control Station
• Three-position directional valve for pneumatic drive unit
• Dual air regulators for directional speed control
• Control abrasive flow from console
• One palm button shuts o UHP water and abrasives
Vacuum Generator
• Steel construction
• Pneumatic control vacuum
• Locking quick disconnects
• Lightweight compact design

Designed for use in remote and potentially
hazardous environments, Jet Edge’s Spyder
Head Manipulator
Abrasivejet Radius and Circle Cutting System
• Drive unit adapts for use with track or pipe cutting bands
• Pneumatic reversible drive motor with interchangeable gear drive can be set up on the side of tanks, small
• Precise speed control for accurate cutting feed rates
vessels and large diameter piping. It is held
• Center line mounting of abrasive cutting head
in place by vacuum cups and features a
• Adjustable angle for beveling cuts
self-aligning centering pin for fast and
Permalign® II Abrasive Head
reliable setup. Motion components are
Length
10.94 in (27.8 cm)
Weight
4 lbs ( 1.8 kg)
made from non-ferrous materials, and
Operating air pressure (min) 60 psi (4 bar)
cutting head manipulators are powered by
Water pressure (max)
60,000 psi (4100 bar)
pneumatic motors, making the Spyder
Orifice range
.005 - .021 in (.127 - .53 mm)
Nozzle range
.020 - .065 ID (.508 - 1.65 mm)
suitable for use in all environments.
Max flow rate
2.1 gpm (7.95 lpm)
High Flow Abrasive Head (for cutting thicker
material or multiple layers)
Length
7.55 in (19.1 cm)
Weight
4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max)
45,000 psi (3100 bar)
Orifice range
.020 - .036 in (.51 - .91 mm)
Nozzle range
.095 - .125 ID (2.41 - 3.18 mm)
Max flow rate
5.1 gpm (19.04 lpm)

A master control panel allows operators to control the cutting head manipulators,
direction, speed of travel, abrasive delivery and vacuum components from one
location.

powered by jet edge!
The Riding Deckblaster
is powered by a
Jet Edge waterjet
intensifier pump.

Abrasive Delivery System
• Lightweight durable high-impact poly design
• Two-wheel pneumatic tires with rigged frame
• Air-regulated metering valve
• Delivery rate: up to 3 lb (1.36 kg)/minute
Model iP55-280DS

MADE IN THE

12070 43rd St. N.E. St. Michael, MN 55376 USA

ne 2011

Rev. July 2011

Specifications subject to change.

www.jetedge.com
+1-763-497-8700 | 1-800-JET-EDGE
sales@jetedge.com