iP55-30-waterjet-intensifier-pump0 pages
WATERJET SYSTEMS
nnnnConstruction
nnnn• Heavy gauge sheet metal covers
nnnn• Rugged all-steel welded framework
nnnn• Hinged cover and removable access panels for
nnnnconvenient machine inspection and maintenance
nnnn• Integral hydraulic reservoir
nnnn• Sound insulated for quiet operation
nnnn• NEMA 12/13 rated electrical enclosure
nnnnStandard Features
nnnn• High-efficiencyTEFC motor
nnnn• 1500 or 1800 nominal motor speed (rpm)
nnnn• Electronically shifted intensifiers
nnnn• Wye-Delta soft start with disconnect
nnnn• 0.5 gallon (1.9 liter) high pressure attenuator with 1.45 micron filtratio
nnnn• Safety shutdown systems
nnnn• Automatic safety pressure bleed-down valve
nnnn• Thermostatically controlled cooling system
nnnn• Programmable Logic Controller (PLC) for operation and safety monito
nnnn• Axial piston, variable displacement, pressure-compensated hydraulic
nnnn• Liquid-filled pressure gauges
nnnn• UHP safety shielded tubing
nnnn• TUV, TTK, ASME attenuator certifications
nnnn• U/L, CU/L listed industrial control panel
nnnnIPBB-30
nnnnINTENSIFIER PUMP
nnnnring
nnnnpump
nnnnPhysical Size
nnnn•Length: 64 in (163 cm)
nnnn•Width: 30 in (76 cm)
nnnn• Height: 53 in (135 cm)
nnnn• Approximate Weight with Fluid: 2000 lbs. (907 kg)
nnnnElectric Motor
nnnn• Motor Output: 30 hp (22 kw)
nnnn• MotorType: High Efficiency TEFC electric motor
nnnn• Full load amps @ 460vac: (60Hz) 38
nnnn• Full load amps @ 230vac: (60Hz) 76
nnnnIntensifier
nnnn•Type: Single piston, dual plunger, reciprocating
nnnn• Number of Intensifiers: one
nnnn• Rated Pressure: 60,000 psi (4,100 bar)
nnnn• Intensification Ratio: 20:1
nnnn• Flow Rate: 0.65 gpm (2.5 Ipm)
nnnn• Maximum Rated Orifice Size: .011 in (.28 mm)
nnnnLow-Pressure Water/Intensification Water
nnnn•Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM
nnnn• Supply Requirements: .65 gpm @ 30 psi (2.1 bar)
nnnnmin./75°F (24°C) Max.
nnnn• Filtration: 1, .45 Micron
nnnnCoolant Water
nnnn• Maximum Temperature: 70°F (21 °C)
nnnn• Minimum: 0-4.0 gpm (0-15 Ipm) @ Minimum 20 psi (1.3 bar)
nnnn• Ability to Remove: 22,000 BTUs / Hour
nnnn• Heat Exchanger: Shell and Tube (2)
nnnnHydraulics
nnnn• Reservoir Capacity: 20 gallons (76 liters)
nnnn• Filtration: Full Flow 10 Micron
nnnnEnvironmental
nnnn• Ambient Room Temperature: 50°-100°F (10°-37°C)
nnnn• Relative Humidity: Noncondensing, Maximum 95% @ 100°F
nnnnSpecifications subject to change.
nnnnMADE INTHE
nnnnDl^.igj www.jetedge.com
nnnn+1-763-497-8700| 1-800-JET-EDGE
nnnnsales@jetedge.com
nnnnSL 12070 43rd St. N.E. St. Michael, MN 55376 USA
"