BDTG32 - contact stainless steel gasfilled capillary thermometer0 pages

For technical data sheets and dimensional drawings please refer to our website www.badotherm.com
21/01/2008 rev 0
118-bis
BDTG32-DISTANCE
2.1.2.
contact stainless steel gasfilled capillary thermometer
Badotherm gasfilled model BDTG32 series thermometer is available as
100/160 mm. and has a contact built on the dial which is closed with a high
bayonet ring. Standard with 1 meter wire pvc. These gasfilled thermometers
are suitable for corrosive media and environments in chemical process,
petroleum and food industries and are used when temperature must be
measured remotely. The standard connection on these thermometers is an
adjustable fitting in order to give more flexibility to stem length immersions.
mounting variations
type A bottom connection, direct mounting
type C surface mounting, bottom connection
type D back connection, direct mounting
type E panel mounting, back connection
type F console mounting, bottom connection
type BDTGE every angle connection, direct mounting
technical specification model BDTG32-distance
diameter dial window ranges
100/160 mm aluminium glass from -80/650 °C
casing stem element connection
AISI304 bayonet AISI316 elastic spring 1/2” bsp adjustable
bezel stem dia pointer accuracy
AISI304 bayonet 12 mm fixed 2.0% FSD
Note: stainless steel capillary is available with or without armouring
snap-action contacts by magnets.
available with single or double acting contacts.
contacts built on the dial.
options and special executions at extra cost
casing AISI316
bezel AISI316
dials customized -i.e., non standard ranges or logos
certificates calibration-; conformity-; material
manuals installation and maintenance
connection NPT, MM, BSPT, acc JIS in various sizes
connection type without connection
connection position top or side
stem diameters 1/4" / 3/8" / 1/2" / 6 mm / 8 mm / 10 mm
separate wells see index 2.3.
capillary standard with 2 meter length and armoring
accuracy 1% for inductive contacts
low action contacts S1/S2/S3/S11/S12/S22/S33
magnet contacts M1/M2/M3/M11/M12/M22/M33
inductive contacts I1/I2/I11/I12/I21/I22
temperature instrumentation