BDTM954 ? FIVE VALVE MANIFOLD0 pages
BADOTHERM"
V-DATA SHEET
BDTM954 - FIVE VALVE MANIFOLD
Badotherm manifold model BDTM954 is a five valve manifold that can be
used for isolation, bleeding, calibration, and testing of differential pressure
instruments. The BDTM954 manifold has the process connections on the
bottom side and the instrument connections on the top side. All Badotherm
manifolds are standard stainless steel and optional available in exotic
materials. This valve is available with a rotatable conical tip to ensure perfect
alignment for a bubble tight shut-off.
MATERIAL SPECIFICATIONS
BODY
AISI316(L)
STEM
AISI630
TIP
AISI420
BONNET
AISI316(L)
SPINDLE GASKET
Virgin PTFE
TECHNICAL SPECIFICATIONS
BDTM954
Process connection
Instrument connection
Vent connection
Purge connection
Maximum pressure
Maximum temperature
l/2"NPT-f
l/2"NPT-f
l/4"NPT-f
l/4"NPT-f
413 bar (6.000 psi)at38°C
240 °C
EXOTIC SPINDLE CONFIGURATIONS AND BODY MATERIALS
flow diagram
product features
PROC
non-rotating spindle tip
bonnet locking pins
safety back seating T-bar
2x isolation valves (blue)
2x vent valves (red)
equalizing valves (green)
stem_tip_code_ body material
Monel400 Stellite 6B M4-6b Monel 400
HastelloyC-276 Stellite 6B HC-6b Hastelloy C-276
Duplex 2205 Stellite 6B DU-6b Duplex 2205
Super Duplex 2507_Stellite 6B SD-6b Super Duplex 2507
Titanium Gr. 2 Stellite 6B T2 - 6b Titanium Gr. 2
Inconel 625 Stellite 6B 16-6b Inconel 625
Monel 400 Monel 500 M4-M5
Stellite 6B Stellite 6B 6b-6b
SPINDLE GASKET
material operating temperature
Virgin PTFE -200/+260°C
Flexible Graphite_-250 / +450°C_
OPTIONS
■ cleaning for oxygen service (only with Virgin PTFE spindle gasket)
■ high pressure up to 689 bar (10.000 psi) at 38°C
■ anti-tamper spindle to prevent unauthorized use
■ mounting bracket for 2" pipe mounting
page 1 of 2
"