M3A - direct mounted three valve manifold0 pages

technical specification model
moc inlet outlet vent
AISI316 1/2” NPT-f flanged no
equalizing bonnet isolating bonnet stem packing
30° top side left and right side HS PTFE
pressure temperature bracket holes
413 (6000) bar (psi) 240°C provided
design information
.. self aligning metal seats flow diagram
.. compact design
.. non-rotating spindle tip
.. metal seal between body and bonnet
.. bonnet locking pins
.. safety back seating T-bar
.. full traceability of all materials
.. 100% pressure tested
dimensional drawings
For technical data sheets and dimensional drawings please refer to our website www.badotherm.com
11/01/2008 rev 1
even
direct mounted three valve instrument manifold
Badotherm model M3A is a three valve manifold that can be used for complete isolation
and differential pressure instruments. The M3A manifold has two process connection
at the front side and a flanged instrument connection at the back side of the
manifold. All Badotherm manifolds are available with a variety of seat and seal materials
and are fully tested under pressure in the factory. This valve is available with a stan-
M3A dard HS stem with conical tip to ensure perfect alignment for a bubble tight shut-off
4.1.2.
manifolds and valves
front side