M5G - remotely mounted five valve instrument manifold0 pages

technical specification model
moc inlet outlet vent
AISI316 1/2” NPT-f 1/2” NPT-f 2x 1/4"NPT-f (plugged)
venting bonnet equalizing bonnet x2 isolating bonnet stem
front side front side right and left side HS
packing pressure temperature bracket holes
PTFE 413 (6000) bar (psi) 240°C provided
design information
.. self aligning metal seats flow diagram
.. compact design
.. non-rotating spindle tip
.. metal seal between body and bonnet
.. bonnet locking pins
.. safety back seating T-bar
.. full traceability of all materials
.. 100% pressure tested
dimensional drawings
For technical data sheets and dimensional drawings please refer to our website www.badotherm.com
11/01/2008 rev 1
even
remote mounted five valve instrument manifold
Badotherm model M5G is a three valve manifold that can be used for the isolation
of differential pressure instruments. The M5G manifold has two female connections
at the bottom side and two female connections at the top side. All Badotherm manifolds
are available with a variety of seat and seal materials and are fully tested under
pressure in the factory. This valve is available with a standard stem with HS with a
M5G conical tip to ensure perfect alignment for a bubble tight shut-off
4.1.2.
manifolds and valves
front side