AUE400 - Rotation Control Module0 pages

Product Information
BRAIME
AUE 400
ROTATION CONTROL MODULE
• The rotation control module AUE 400 is designed to be used with a shaft
encoder, a wheel encoder or a proximity sensor to detect a speed.
• Three speed ranges are available on the module: 1- 10 RPM, 1- 100 RPM &
1- 1000 RPM. The selection is done with a connection to the bornier (?) . Other
speed ranges are available from 0,01 to 20 000 RPM.
• Under normal working conditions the output contact is powered; if the speed
reduces below the one specified, the contact falls.
• A 10 second start-up delay is available if needed.
• A copy of the entry signal is available for connection to another module or
another speed monitoring system.
OPTIONS
Rotech Encoder for difficult environments
Encoding Wheel Rotech
Whirligig WG2A-BR for explosive environments & Mag-Con
Whirligig Heavy duty in stainless steel
Tacho
Detailed specification, wiring diagrams and installation/operating
instructions available immediately upon request.
Please refer to instruction manual for correct installation.
Information subject to change or correction. July 2007.
4B BRAIME ELEVATOR COMPONENTS LTD Hunslet Road, Leeds, LS10 1JZ, UK
Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 4b-uk@go4b.com
www.go4b.com