Auto-Set Flush Probe - Radio Frequency (RF) Capacitance Plug Switch0 pages

Product Datasheet

Auto-Set™ Flush Probe

4B
Components
Limited

Auto-Set Flush Probe
TM

Radio Frequency (RF) Capacitance Heavy Duty Plug Switch
APPLICATION
The Auto-Set flush probe is a low profile RF capacitance plug switch
level monitor designed for tight fitting applications to detect levels of
liquids, powders and free flowing granular solids in conveyors, bucket
elevators and surge hoppers.
METHOD OF OPERATION
The Auto-Set flush probe incorporates simple push-button calibration
with microprocessor enable/disable switch for total protection of stored
values. Once the Auto-Set is calibrated for the application it never has
to be re-calibrated. Data is stored in non-volatile memory so it is not
affected by power loss.
A four digit LED display shows set values for uncovered, covered and
trip settings, allowing simple set-up and adjustment. A set of voltagefree changeover relay contacts are actuated when the level of the
material in the container reaches the probe. The unit incorporates a
unique power shield which automatically compensates for material
build-up around the probe and on the sides of the container, preventing
false indication. The solid state electronics are housed in a
weatherproof, flame retardant, glass-reinforced nylon enclosure.
The Auto-Set flush probe is top or side mountable, and the probe
inserts 1 to 2 inches into a tank or spouting, has no moving parts and is
made from 1/4 inch 316 stainless steel plate. It can be used with
container walls up to 1 inch thick.

ATEX Approved
Versions Available

FEATURES
► High and Low Level Indication
► Multi-Voltage (AC / DC)
► Low Profile Applications
► 316 Stainless Steel Probe
► Fail-Safe
► Push Button Calibration
► Digital Display & Internal Timer
► Power Shield Compensates for Material Build-Up on Probe
PART NUMBERS/ACCESSORIES
► ATS7V0FC-FP
Auto-Set Flush Probe

Detailed specification, wiring diagrams and installation/operating instructions available upon request.

4B COMPONENTS LIMITED 625 Erie Avenue, Morton, IL 61550 USA

Tel: 309-698-5611

Fax: 309-698-5615

Please refer to instruction manual for correct installation.
Information subject to change or correction. Sept 2013

www.go4b.com/usa