ADB adjustable depth bearing temperature sensors0 pages

Product Information

BRAIME

Bearing Temperature Sensor

ADB Series – Cable Entry

NEW

Adjustable Depth Bearing Temperature Sensor

PRODUCT

APPLICATION
For use on any application where bearing temperature
monitoring is desired or required.
METHOD OF OPERATION
The ADB series have been designed to allow the depth of the
sensor to be adjustable depending on your application. A
number of versions are available with probe lengths of 50,
100, 200 and 300 mm. The sensors screw directly into a
bearing housing through a 1/4” BSP threaded grease zerk.
Each sensor is fitted with a grease zerk to allow lubrication of
the bearing without the need for removal of the sensor. The
ADB series have NTC or PT100 type thermistors which allow
for continuous temperature monitoring. The sensor is supplied
with a 3m attached cable and can be connected to a PLC or to
a hazard monitoring system, such as 4B’s T500 Hotbus Elite,
Watchdog Elite, or T400 NTC Elite. The connections are not
polarity sensitive therefore special connection requirements are
eliminated, and the cable can be extended in the field.

ADB Sensor – Cable Entry
(ATEX and IECEx Zone 20 Approved)

FEATURES
► Adjustable Sensor Depth
► Screw in Positive Mount Installation
► Grease Zerk for Bearing Lubrication
► NTC or PT100 Thermistor - Continuous Temperature
► Stainless Steel (SS) Braided Cable
► ATEX and IECEx Zone 20 Approved
Part Number

Description

Thermistor
Type

Thread

ATEX
Zone

IECEx

ADB810V3AI

3m SS Cable; 100mm Probe

NTC

¼” BSP

20

ADB810V3AI/D2

3m SS Cable; 50mm Probe

NTC

¼” BSP

20

ADB810V3AI/D8

3m SS Cable; 200mm Probe

NTC

¼” BSP

20

ADB810V3AI/D12

3m SS Cable; 300mm Probe

NTC

¼” BSP

20

ADB819V3AI

3m SS Cable; 100mm Probe

PT100

¼” BSP

20

ADB819V3AI/D2

3m SS Cable; 50mm Probe

PT100

¼” BSP

20

ADB819V3AI/D8

3m SS Cable; 200mm Probe

PT100

¼” BSP

20

ADB819V3AI/D12

3m SS Cable; 300mm Probe

PT100

¼” BSP

20

Note: 5m Cable Sensors are Available on Request

Detailed specification, wiring diagrams and installation/operating instructions available upon request.

4B BRAIME ELEVATOR COMPONENTS LTD Hunslet Road, Leeds, LS10 1JZ, UK
Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 4b-uk@go4b.com

Please refer to instruction manual for correct installation.
Information subject to change or correction. Jan 2013

www.go4b.com