3M(TM) Dri-Shield Moisture Barrier Bag 3700 Data Sheet0 pages

3M™ Moisture Barrier Bag Dri-Shield 2000

Product Data Sheet

Product Data Sheet

PRELIMINARY

3M™ Moisture Barrier Bag Dri-Shield 3700
This foil moisture barrier bag is designed to provide a static safe environment
for sensitive electronic devices. A stronger polyester layer helps to prevent sharp
trays from puncturing the bag. The bags are heat sealable and suitable for vacuum
packaging. Bags are printed with ESD and moisture warning symbols, and a lot code
for traceability.

September 30, 2013

It is critical that you determine if this bag is suitable for your intended purpose, and
whether you need to include desiccant, a humidity indicator card and/or modify the
associated storage time.

9900 PSI, 68 MPa

ASTM D882

Puncture Resistance

25 lbs., 111 N

MIL-STD-3010 Method 2065

Seal Strength

20 lbs, 89 N

ASTM D882

Thickness

4 mils, .1016 mm +/-15%

MIL-STD-3010 Method 1003

Marking Adhesion

Pass

IPC-TM-650 2.4.1

Electrical

Typical Value

Testing Method

ESD Shielding

<10 nJ

ANSI/ESD STM11.31

Surface Resistance Interior

11

<1x10 ohms

ANSI/ESD STM11.11

Surface Resistance Exterior

<1x1011 ohms

ANSI/ESD STM11.11

Static Decay

< 2 seconds

ETS 406D

EMI Attenuation

45 dB

1 to 10 GHz

Cleanliness

Typical Value

Testing Method

Not Detected

ASTM E168

Typical Value
400°F, 204°C
0.6 – 4.5 seconds

Pressure

This product is intended for commercial use only. This product is not on the Qualified
Product Listing under the Defense Standardization Program.

Tensile Strength

Time

3M™ Moisture Barrier Bag
Dri-Shield 3700
(optional label can be pre-applied)

ASTM F1249

Temperature

3M cannot make any representation regarding moisture barrier protection or specific
Moisture Vapor Transmission Rates with respect to this bag at this point in time.

Testing Method

Testing in progress

Heat Sealing Conditions

These bags are tested to meet or exceed certain electrical and physical requirements
of ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Compliant* and lead-free**.

Typical Value

Moisture Vapor
Transmission Rate
(MVTR)

Silicone

3M Moisture Barrier Bags Dri-Shield 3700 are manufactured from a laminate of
polyester, foil, and polyethylene. The metal layer is intended to provide shielding of
Electrostatic Discharge (ESD) and to help minimize the penetration of electric field.

Physical

30 – 70 PSI, 2.05 – 4.8 KPa