HM Power Header0 pages

3M™ MetPak™ HM Power Header
2 mm Type A, 110/44/4 Signal/Ground/Power Contacts, 5 Rows, Straight

HM Series

•
•
•
•
•

Modular/scalable format IEC 61076-4-101
Press-t or solder tail version
63 mated lines per linear inch
Four integrated 8.25 A power blades
Ships with protective cap, which also serves as an
insertion tool
• End-to-end stackable with 5 row 3M™ MetPak™ CP2,
HM and HSHM products
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3mconnector.com for compliance information

Date Modied: November 16, 2010

TS-2089-B
Sheet 1 of 3

Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0

Color:
Material: Copper Alloy
Plating: See Ordering information

Marking: 3M Logo, Part Number, Revision, Date Code

Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.98 N [100 g] Power
Engagement Force (Nominal): 0.32 N [33 g] Signal, 1.42 N [145 g] Power
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.89 N [91 g] Power
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.93 mm [.076 in] Power
Mate/Unmate Cycles: 250
Application: This module is suitable for stand-alone use with pin lengths up to 6.80 mm.
Limited capture of 0.75 mm in longitudinal and 1.00 mm in transverse directions.

Electrical:
Current Rating (Fully Loaded): 1 A @ 70° C Signal, 8.25 A at 70×C Power
Insulation Resistance: 1 x 104 MΩ @ 100 VDC
Withstanding Voltage: 750 Vrms

Environmental
Temperature Rating: -55° C to 125° C
Process Rating: Maximum 260°C (per J-STD-020C)
Withstanding Voltage: 1 (per J-STD-020C)
UL File No.: E68080

3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com

MetPak is a trademark of 3M Company.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373