HSHM Press-Fit Power Heade0 pages

3M™ MetPak™ HSHM Press-Fit Power Header
2 mm Type D, 176 Signal/4 Power Contacts, 8 Rows, Straightt

HSHM Series

•t
•t
•t
•t
•t
•t
•t
•t

Up to 5 Gb/s data rates
Low crosstalk at high frequencies
50/100 Ω (single-ended /differential) impedance
Modular/scalable format IEC 61076-4-101
101 mated lines per linear inch
Four integrated 8.25 A power contacts
Integrated guide pin
End-to-end stackable with 8 row 3M™ MetPak™ HM
and HSHM headers
•t See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3mconnector.com for compliance information

Date Modified: April 29, 2011

Physical

TS-2080-C
Sheet 1 of 3

Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0

Contact:
Material: Copper Alloy
Plating: See Ordering Information

Performance

Mechanical:

Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [75 g] Shield
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [22 g] Shield
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [20 g] Shield
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [0.062 in] Shield
Mate/Unmate Cycles: 250
Application: This module is suitable for stand-alone use. (Refer to IEC-61076-4-101)

Electrical:
Data Rate: 5 Gb/s
Characteristic Impedance: 50 Ω Single-ended, 100 Ω Differential
Current Rating (Fully Loaded): 1 A @ 70° C Signal
Insulation Resistance: 104 MΩ @ 100 VDC
Withstanding Voltage: 750 Vrms

Environmental

Temperature Rating: -55° C to 125° C

UL File No.: E68080t

3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com

MetPak is a trademark of 3M Company.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373