QS10.DNET0 pages
QS10.DNET
24V, 8A, DEVICENET® POWER SUPPLY
Q-Series
POWER SUPPLY
AC 100-240V Wide-range Input
DeviceNet® Approved
NEC Class 1 Compliant
Width only 60mm
Efficiency up to 93.4%
Active Power Factor Correction (PFC)
Negligible low Inrush Current Surge
Short-term Operation down to 60Vac and up to 300Vac
Full Power Between -25°C and +60°C
DC-OK Relay Contact
Quick-connect Spring-clamp Terminals
3 Year Warranty
GENERAL DESCRIPTION
SHORT-FORM DATA
The QS10.DNET power supply is a derivate of the
Dimension QS10 family, which is specially designed to
meet the DeviceNet® requirement. The QS10.DNET exists
beside the QS5.DNET, which is the right choice to supply
networks that use NEC Class 2 cables.
Output voltage
Adjustment range
Output current
Output power
Output ripple
Input voltage
Mains frequency
AC Input current
Power factor
AC Inrush current
Efficiency
Losses
Temperature range
Derating
Hold-up time
Dimensions
The specialties of DeviceNet® power supplies are:
The nominal and overload currents are sized for the
ratings of the DeviceNet® cables.
Large load capacitors can be charged in a very short
period of time.
After turn on, the output voltage increases according
to the DeviceNet® timing specification.
The upper level of the output level is limited to protect
the network.
The most outstanding features are a high efficiency,
compact size, wide-range input voltage, a very low
inrush surge and a DC-ok contact. High immunity to
transients and power surges and a low electromagnetic
emission makes usage in nearly every environment
possible.
DC 24V
24 – 24.5V
8A
192W
< 50mVpp
AC 100-240V
50-60Hz
1.77 / 1.0A
0.98 / 0.92
typ. 4 / 7A peak
92.8 / 93.4%
14.9 / 13.6W
-25°C to +70°C
5W/°C
typ. 33 / 34ms
60x124x117mm
20Hz to 20MHz
±15%
±6%
at 120 / 230Vac
at 120 / 230Vac
at 120 / 230Vac
at 120 / 230Vac
at 120 / 230Vac
operational
+60 to +70°C
at 120 / 230Vac
WxHxD
Unique quick-connect spring-clamp terminals allow a
safe and fast installation. A large international approval
package makes this unit suitable for nearly every
situation.
ORDER NUMBERS
MARKINGS
Power Supply
QS10.DNET
24V Power supply
Accessory
ZM1.WALL
ZM13.SIDE
UF20.241
Wall mount bracket
Side mount bracket
Buffer unit
IND. CONT. EQ.
UL 508
UL 60950-1
Class I Div 2
Marine
Dec. 2014 / Rev. 2.2 DS-QS10.DNET-EN
All parameters are specified at 24V, 8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0
Germany
EMC, LVD
1/22
"