AP series0 pages

CONTROL > Proportional poppet valves Series AP
CATALOGUE > Release 8.5
Directly operated proportional valves
Series AP
New
2/2-way proportional valves, NC
Size 16 - 22 mm
» Available in two sizes:
16 and 22 mm
2
» PWM or current operation
CONTROL
» Open loop flow control
Series AP directly operated 2/2-way
proportional solenoid valves, NC, with
nominal diameters range from 0.8 to
2.4 mm, can be used where an open
loop flow control is required, with gas
mixtures, to control free flows or blows,
or emptying chambers using vacuum.
Thanks to the use of standard Camozzi
solenoids suitable to for ED at 100%,
also the Series AP valves can work
according to ED 100%.
The proportional valves Series AP have
been manufactured to optimize and
reduce friction and stick-lip effects.
The output flow is proportional to the
PWM or current control signal.
As they can work also in vacuum,
a minimum working pressure is not
required.
GENERAL DATA
Valve functions
2/2 NC
Construction
proportional directly operated
Materials
body = brass
seals = NBR
Ports
M5 - G1/8
Mounting
in every position
Working temperature
0 ÷ 60°C
Maximum working pressure
see table
Nominal flow (Qn - Kv)
see table
Nominal diameter (ø)
see table
Fluid
inert gas
Hysteresis
16 mm size < 5%
22 mm size < 5%
Repeatibility
16 mm size < 2%
22 mm size < 1%
Sensibility
16 mm size < 2%
22 mm size < 1%
While choosing the valve characteristics and in order to reach the highest performances, it is important to know that there must be a pressure difference of
30% at least between the inlet and the outlet. For example: inlet P 10 bar - optimum outlet P from 7 to 0 bar.
2/15.40.01
729
Camozzi Spa reserves the right to vary models and dimensions without notice.
Products designed for industrial applications. Sale to general public is forbidden.
General terms and conditions for sale are available on www.camozzi.com.