Series 94 and 95 stainless steel cylinders0 pages

CATALOGUE > Release 8.7

1

Series 94 and 95
stainless steel mini-cylinders

MOVEMENT

MOVEMENT > Series 94 and 95 stainless steel cylinders

Single-acting and double-acting, magnetic
Series 94: ø 16, 20, 25 mm
Series 95: ø 25 mm, cushioned
»» In compliance with
Cetop RP52-P and DIN/
ISO 6432 standards
»» Clean design
»» Stainless steel AISI
304 and AISI 316

Series 94 and 95 cylinders are
suitable for use in the off-shore, naval,
pharmaceutical, nuclear and food
industries.

Their construction enables the
replacement of all seals.
Series 95 is normally equipped with
adjustable end-stroke cushioning by
means of a screw on the end block.
In addition both Series 94 and 95 are
equipped with a mechanical cushioning
in order to make the impact of the piston
less noisy as it reaches the end of the
stroke.

GENERAL DATA
Construction

end blocks secured to the tube

Operation

single-acting and double-acting

Materials

end blocks and rod in stainless steel AISI 316, seals in NBR,
plastic guiding element, NSF H1-certified lubricant
Series 94: tube in stainless steel AISI 304
Series 95: tube in stainless steel AISI 316

Mounting

several types of cylinders clamps available

Strokes min - max

10 ÷ 500 mm

Operating temperature 0° - 80°C (with dry air -20°C)
Operating pressure

1 ÷ 10 bar

Speed

10 ÷ 1000 mm/sec (without load)

Fluid

clean air, without lubrication.
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.

1/3.15.01

Products designed for industrial applications.
General terms and conditions for sale are available on www.camozzi.com.