Series 90 stainless steel cylinders0 pages

CATALOGUE > Release 8.5

MOVEMENT > Series 90 stainless steel cylinders

Series 90 stainless steel cylinders

MOVEMENT

1

Single- and double-acting, cushioned, magnetic
ø 32, 40, 50, 63, 80, 100 and 125 mm

»» In compliance with ISO
15552 standards and with
the previous DIN/ISO 6431/
VDMA 24562 standards
»» Clean design
»» Stainless steel AISI 316
»» End-stroke cushioning

Series 90 cylinders are suitable for use
in harsh environmental conditions as
in the offshore, naval, pharmaceutical,
nuclear and food industries.

This series of cylinders is normally
equipped with end of stroke buffers with
adjustable pneumatic cushioning.
Moreover, they are equipped with a
mechanical cushioning that makes the
impact of the piston less noisy as it
reaches the end of the stroke.

GENERAL DATA
Construction

with tie-rods

Operation

single-acting or double-acting

Materials

- end blocks, barrel and rod in stainless steel AISI 316
- seals in NBR
- plastic guiding element, NSF H1-certified lubricant

Mountings

several types of cylinders mounting brackets available

Stroke

25 ÷ 800 mm

Operating temperature 0°C ÷ 80°C (with dry air - 20°C)
Operating pressure

1 ÷ 10 bar

Speed

10 ÷ 1000 mm/sec (no load)

Media

Filtered air, without lubrication.
If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.

Products designed for industrial applications.
General terms and conditions for sale are available on www.camozzi.com.

1/3.05.01