Series MSP - 10W Mass Spec Power Supply Modules0 pages

Series MSP

MASS SPECTROMETRY POWER SUPPLY MODULES

FEATURES
10W output power
High stability
Low ripple
Low temperature coefficient
Screened case for low magnetic radiation
High reliability
Versatile control options

DESCRIPTION

Output Current:
0.66mA to 10mA depending on model.

HiTek Power’s Mass Spectrometry product ranges draw on our
extensive high voltage design skills and Mass Spectrometry
application knowledge.

Input Voltage:
+24V DC ±10%.

The Series MSP is a range of high stability, unipolar source modules
for precision applications. The Series MSP can be supplied either as
a positive or a negative output voltage module - please state which is
required when ordering. These modules provide reliable operation
even in short circuits or ARC conditions. These modules can either
be set by internal potentiometer, external voltage or by an external
potentiometer, as shown in the control link information.
HiTek Power uses a modular design approach within its Mass
Spectrometry products, which enables us to offer an extensive range
of performance combinations.
Simple changes can be made from changing cable lengths and
connectors to completely new custom solutions using HiTek Power’s
proven power conversion topologies, control methods and mechanical
knowledge. Please contact the Sales Team to discuss your specific
requirements.

SPECIFICATION
Output Power:
10W max depending on model.
Output Voltage:
10V to 15kV depending on model.

Input Current:
1A maximum depending on model.
Line Regulation:
Less than 10ppm for a 1V input voltage change.
Load Regulation:
Less than 10ppm for a 10% to 100% load change.
Ripple:
Less than 10mV to less than 100mV depending on model.
Voltage Control:
0V to 10V = 0% to 100%, accuracy ±2%.
Can also be controlled by internal potentiometer (see connection
details).
Current Control:
Fixed at approximately 110% to 130% of maximum.
Voltage Monitor:
0V to +10V = 0% to 100%, accuracy ±2%.
Current Monitor:
0V to +10V = 0% to 100%, accuracy ±2%.
Stability:
Less than 0.01% per hour, 0.05% in 8 hours (after 1 hour warm up).

w w w. h i t e k p o w e r. c o m