SERIES OL600W0 pages

Series OL600W

600W HIGH VOLTAGE POWER SUPPLY

FEATURES
Output Voltages from 1kV to 80kV
High Packing Density - 600W in 1U (80kV 2U)
Exceptional Reliability
Complies with SEMI F47 Standard
High Stability
Arc Count and Extinguish (ACE)
Marked for EU LV Directive 2006/95/EC
RoHS Compliant to EU Directive 2011/65/EU
Full Local and Remote Control Monitoring
Custom Options Available
Voltage or Current Control
DESCRIPTION
The HiTek Power Series OL600W range of single output high voltage
power supplies meets the exacting requirements found in electron
and ion beam systems. The OL600W is also suitable for use in X-ray
systems, ion and chemical vapour deposition and general laboratory
use.
Designed using the latest power switching IGBTs to ensure efficient
and reliable operation over the full operating range the Series OL600W
will give excellent performance in the most severe of electrical
environments. The Series OL600W utilises air as the primary insulation
medium for voltages up to 80kV; achieving a high packing density for
high voltage supplies giving 65W/litre, 1W/inch3. The 1U construction
(2U for 80kV units) allows operation at full power when close mounted
in a standard equipment rack, giving significant savings in rack space
in large systems. Featuring HiTek Power’s proprietary Arc Count and
Extinguish (ACE) system for managing systems where load arcing is
possible, the Series OL600W protects both itself and the load from
damage that may be caused by excessive arcing whilst allowing
normal operation to continue.

SPECIFICATION
Output Power:
600W maximum at full rated output voltage and current.
Output Voltage:
Units available with maximum output voltages from 1kV to 80kV.
Output Current:
Up to 600mA for 1kV and 7.5mA for 80kV, see table.

Input Voltage:
185VAC to 255VAC or 103VAC to 127VAC (Auto Range Selection). Range
does not change after power up. 47-63Hz single phase and earth.
Input Current:
Not exceeding 6A rms (185VAC to 255VAC).
Not exceeding 12A rms (103VAC to 127VAC).
Polarity:
Positive or Negative to order.
Specification Range:
Specifications apply above 5% of rated output voltage.
Voltage Ripple:
Voltage Mode: t
Less than 0.1% of rated output voltage + 2V, peak
to peak
ttor
tt
Less than 0.02% of rated output voltage +0.5V,
rms.
Current Mode: t
Less than 0.5% of rated output voltage + 2V, peak
to peak.
ttor
tt
Less than 0.1% of rated output voltage +0.5V, rms.
Voltage Regulation:
Line: tt
Less than 0.05% ±0.5V change in output voltage
for a 10% change in line voltage.
Load: tt
Less than 0.05% ±0.5V change in output voltage
for 0 to 100% change in load current.

w w w. h i t e k p o w e r. c o m