SERIES OLH10KD0 pages

Series OLH10KD

10kW HIGH VOLTAGE POWER SUPPLIES

FEATURES
10kW of output power
Wide dynamic range with dual supply configuration
Output voltages from 60kV to 500kV for high range

Output voltages from 6kV to 10kV for low range
Robust IGBT converter design
Exceptional reliability
High Stability
Arc Count and Extinguish (ACE)
Full Local & Remote control and monitoring
Analogue or RS232 remote control
Voltage or current control
RoHS compliant to EU Directive 2011/65/EU
Custom options available
Marked

DESCRIPTION
The Series OLH10KD range of high voltage power supplies recognises
the requirement for high stability and very low ripple across a
wide range of output voltages. This is achieved by combining the
high power (HE), 10kW supply with a low power (LE), 1kW supply
in the same converter chassis. The output from the low power
supply is coupled into the HV unit so that either can be used.
The Series OLH10KD is designed to meet the rigorous requirements of
ion and electron beam systems, ion implantation and X-ray equipment.
There are three different input voltage variants available to order: the
OLH10KD (208VAC), the OLH10KDC (380VAC) and the OLH10KDE (400VAC).
The Series OLH10KD system consists of two units: a rack mounting
power converter through which both local and remote controls
can be facilitated, and a separate HV unit employing a modular
disc construction. Numerous features are incorporated to ensure
system integrity is maintained during adverse operating conditions,
including HiTek Power’s unique Arc Count and Extinguish (ACE)
system for managing systems where load arcing is endemic.
If none of the models listed below suit your requirements, please
contact our Sales Team to discuss a custom version.
Output Power:
10kW maximum for HE supply and 1kW maximum for the LE supply at
full rated output voltage and current.
Output Voltage:
Units available with maximum HE output voltages from 60kV to 500kV
and LE output voltages from 6kV to 10kV.

Output Current:
Up to 166mA for 60kV HE & 6kV LE, and 5mA for 300kV HE & 10kV LE
(see table).
Input Voltage:
OLH10KD:tt
208VAC ±10% (187VAC to 229VAC) 47-63Hz 3 phase
plus protective earth.
OLH10KDC:t
380VAC ±10% (342VAC to 418VAC) 47-63Hz 3 phase
plus protective earth.
OLH10KDE:t
400VAC ±10% (360VAC to 440VAC) 47-63Hz 3 phase
plus protective earth.
Input Current:
OLH10KD:tt
OLH10KDC:t
OLH10KDE:t

Less than 36A per phase.
Less than 22A per phase.
Less than 22A per phase.

Polarity:
Positive or negative to order.
Minimum Voltage:
5% of rated output voltage. The unit may be turned down below this but
the specifications are not guaranteed below this level.
Voltage Ripple:
Voltage Mode:t
Less than 0.1% of rated voltage +2V, peak to peak
or less than 0.02% of rated voltage +1V, rms.
Current Mode:t
Less than 0.5% of rated voltage peak to peak
tt
or less than 0.1% of rated voltage rms.

w w w. h i t e k p o w e r. c o m