PSM242A0 pages

PSM242A
Input: single-phase 115 - 230 Vac
Output: One output 2.5 A - 24 Vdc
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
IP20
DIN Rail Mountable
Extremely small size
Available: 12Vdc/2.5A and 5Vdc/2.5A
Features
Input Data
Input Rated Voltage (2 x Vac)
115 – 230 Vac
Rated Voltage range
93 ÷ 264 Vac
Inrush Current (Vn – In)
11 A 5 msec.
Frequency
47 ÷ 63 Hz
Input Current (Input Rated Voltage)
0.9 – 0.5 A
Internal Fuse
F 4 A
External Fuse (recommended)
Fast 4 A ADEL system ADEL system si riserva di modificare i prodotti illustrati nel presente catalogo,in qualsiasi momento senza preavviso.
All specifications are subject to change without notice
Output Data
Output Voltage (Vn) / Nominal Current (In)
24 Vdc ±3% / 2.5A
Adjustment range (Vadj)
22 ÷ 26 Vdc
Start up with Strong Load (capacitive load)
20.000 / 30.000ìF
Switching on delay applying mains voltage
2.5 sec. (max)
Max. Continuous Current
1.1 x In ± 5%
Reserve Out Current (max. 1 min. 50 °C)
Imax=In+25% approx.
Hold-up Time (at 100 – 240 Vac)
Typ. 27 msec
Residual Ripple
60 mVpp
Minimum Load
No
Efficiency
81 %
Short-circuit protection (hiccup mode)
Yes
Over Load protection (hiccup mode)
Yes
Over Voltage Output protection
Yes (max 35 Vdc)
Parallel connection
Yes
Climatic Data
Ambient Temperature (operation)
-10 ÷ +70 °C
(>50°derating)
Ambient Temperature (Storage)
-25 ÷ +85 °C
Humidity; no moisture condensation
95 % to 25 °C
General Data
Isolation Voltage (Input/Output)
3000 Vac
Input / ground isolation PE
1605 Vac
Output / ground isolation PE
500 Vac
Degree of protection
IP 20
Protection class
I with PE connected
Dimension (w-h-d)
50x95x155 mm
Weight
0.45 kg approx.
Norms and certifications
According to EMC 89/336/EEC and Low voltage 93/68/EEC
Electrical Safety
According to IEC/EN 60950 (VDE 0805) e EN 50178 (VDE 0160) for assembling device. The device must be installed according to IEC/EN 60950.
Generic
Immunity according to EN50082-2 Level 4 Class B
Noise Radiation according to EN 55011
Output Derating Curve
Output Characteristic Curve U/I
Dimensions
d
w
h
Temp (°C)
Load (%)
20
30
40
50
60
10
0
-10
70
25
50
75
100
Current (A)
Out (V)
Vn
In
Imax