EURO205X0 pages

Accessories:
P406 Euro205x Additional Servo Axis
P412 Euro205x Additional Encoder Input
P416 Euro205x Additional Stepper Axis
P350 RS232 Serial Cable
P435 Serial to Fibre-Optic Adaptor
P445 Euro205x Daughter Board Mounting Kit
P317, P318, P319, P326, P327 CAN Modules
Pxxx All Daughter Boards
RACK MOUNT
PRODUCT CODE: P151
EURO205X
18
The Euro205x Motion Coordinator is a Eurocard stepper/
servo controller with the built-in ability to control up to 4
servo or stepper motors in any combination. In addition a
single Trio Daughter Board may be tted to allow the control
of additional axes or a communications channel.
The Euro205x is designed to provide a powerful yet costeffective control solution for OEM machine builders who are
prepared to mount the unit and provide the power supplies
required.
User programs are written in Trio’s established multi-tasking
TrioBASIC language using the powerful Motion Perfect 2
application development software making complex motion such
as cams, gears, linked axes, and interpolation easy.
MULTI-TASKING
•
7 simultaneous TrioBASIC tasks
The Euro205x features a total of 8 axes in software. Any axes
not assigned to built-in hardware can be used as a virtual axis.
Standard axis or multi-axis digital drive daughter boards may
also be added.
AXIS CONFIGURATION (WITHOUT SERCOS / CAN OR SLM)
SERCOS
CAN
SLM
Up to 8 axes*
(2 Standard)
Up to 4 axes*
(2 Standard)
Up to 3 axes
(3 Standard)
P291
P293
P292
*Extra axes added by P701, P702 and P704
The built-in inputs and outputs may be used for system
interaction or may be dened to be used by the controller
for end of travel limits, datuming and feedhold functions as
required. 8 status LEDs are available which can be set to
display the status of banks of inputs or outputs. If the built-in
CAN channel is not used for connecting I/O modules, it may
optionally be used for CAN communications or as a DeviceNet
Slave.
I/O CAPABILITY
• 16 24V dc inputs and 8 24V dc output channels
• 2 x 12 Bit analogue inputs
• Expandable to 256 I/O channels and 32/16 analogue
I/O channels using the P317, P318, P319, P326 and P327
modules
Axis 0
stepper / servo / encoder
Axis 1
stepper / servo / encoder
Axis 2
stepper / servo / encoder
Axis 3
stepper / servo / encoder
Axis 4
Added by use of an axis option board tted to
intelligent option slot
FEATURE ENABLE CODES
Axis 5,6,7
virtual
The Euro205x is supplied as standard with axis 0 congured as
a stepper axis. Software “Feature Enable Codes” (FEC) can be
purchased and then entered using Motion Perfect to enable
axes 1,2 and 3 for either servo or stepper operation. Axis 0
can also be upgraded to a servo axis. No extra hardware is
required to update these additional axes.
*Extra Axes can be added by P406, P412 and P416