OPEN FRONT BOOTHS0 pages
industrial
wood
automotive
OPEN FRONT
BOOTHS
•tHEAVY DUTY CONSTRUCTION
•tBATCH AND AUTOMATED
t PRODUCTION DESIGNS
•tEASY TO INSTALL
•tETL CERTIFICATION AVAILABLE
These floor model booths are designed for both batch type and
conveyorized production systems. Air flow is drawn in through the
open front, across the work area and exhausted through a filter
bank in the back of the booth. The dry arrestor filters trap the
airborne overspray particles before the filtered air is discharged
through the exhaust system and into the atmosphere. The booths
are available in a wide range of designs to meet practically any
production requirement. Conveyor pass-through openings can be
as much as 25% of the booth open front area, without requiring
additional exhaust fan capacity. Specially engineered enclosures
may be designed to meet your requirements. Air replacement units
and intake chambers can be added as well as reduced air flows
for automatic spray operations.
LIGHTING FEATURES
Lighted booths get bright, full booth illumination from four-tube,
48" long, 32-watt, fluorescent light fixtures. Each is mounted
behind clear tempered safety glass and sealed with a trimlock
gasket. All fixtures are UL listed and approved for their intended use
and placement.
EXHAUST SYSTEM FEATURES
A tubeaxial exhaust fan designed specifically for use in paint spray
booths powers the airflow, through the booth and exhaust stack. All
exhaust fans are of non-sparking construction.The motor drive and
bearings are sealed from the air stream of the exhaust. Open drip
proof (ODP) motors are provided with each unit.
OPTIONAL CONTROL PANEL
CONSTRUCTION FEATURES AND QUALITY STANDARDS
t •t Booths are constructed from 18 gauge, prime-quality galvanized steel
t •t All panels and support members are precision punched for easy nut and bolt assembly
t •t Quality brand-name tubeaxial fans and ODP motors
t •t 5/16" inch bolts with self locking nuts
t •t Industry-leading light levels
t •t Spray booth specific, dual voltage T-8 32-watt light fixtures
t •t Booths include installation instructions, fan, motor & drive, fasteners, hardware, and sealant necessary for assembly
t •t Air solenoid valve
t •t ETL listed when optional control panel is added
t •t Fan panel reversible for top or rear exhaust
COL-MET SPRAY BOOTHS COMPLY WITH ALL APPLICABLE OSHA AND NFPA REGULATIONS.