BATCH POWDER BOOTHS (SPRAY TO WASTE)0 pages
powder
industrial
automotive
wood
BATCH
POWDER BOOTHS
•tHEAVY DUTY CONSTRUCTION
•tLOW MAINTENANCE
•tEASY TO ASSEMBLE
•tSPRAY-TO-WASTE DESIGN
•tRECIRCULATES SHOP AIR–
t NO AIR MAKEUP NEEDED
These floor model booths make efficient use of shop space and
are designed for batch powder coating with no provisions for
powder reclamation.
Air is drawn in through the open front of the spray booth, passes
through the booth’s working area into the filtered exhaust plenum.
The air is filtered in three stages and discharged back into the
room. One set of filters will be provided with each booth.
• 1st stage – blanket style filter
• 2nd stage – bag style filter
• 3rd (final) stage – cartridge style filter
LIGHTING FEATURESt
Lighting is provided by 48" fluorescent 32-watt, T-8 type fixtures
(four-tube), mounted behind safety glass, appropriately sealed
from the interior of the spray booth. All fixtures are UL listed and
approved for their intended use and placement.
POWDER EXHAUST FILTER PROVING ASSEMBLY
CONSTRUCTION FEATURES AND QUALITY STANDARDS
t •t Booths are constructed from 18 gauge, prime-quality galvanized steel
t •t All panels and support members are precision punched for easy nut and bolt assembly
t •t Quality brand-name tubeaxial fans and ODP motors
t •t 5/16" inch bolts with self locking nuts
t •t Industry-leading light levels
t •t Spray booth specific, dual voltage T-8 32-watt light fixtures
t •t Booths include installation instructions, fan, motor & drive, fasteners, hardware, and sealant necessary for assembly
t •t Air solenoid valve and filter proving assembly included
t •t Control panel purchased separately
COL-MET SPRAY BOOTHS COMPLY WITH ALL APPLICABLE OSHA AND NFPA REGULATIONS.