EZ PASS-THRU POWDER BOOTHS0 pages

powder
industrial
automotive
wood
EZ PASS-THRU
POWDER BOOTHS
Parts enter the booth through the conveyor openings, then pass the
coating operator stations to receive the coating. The powder overspray
is entrained within the air stream moving to the collector module,
where the cartridge filters will remove the particulate. The containment
air is drawn through the air handler’s primary and final filter system
before being discharged back into the room. Coated parts exit the
booth for conveyance to the cure oven.
CONTROL EQUIPMENT
t •t NEMA 12 Remote Electrical Panel
t •t Primary Disconnect
t •t Automatic Purge/Pulse Control
t •t Main Air Line Disconnect
t •t Magnehelic Pressure Gauge
t •t UL / CUL Approved
SHOWN WITH STAINLESS STEEL OPTION & LEXAN™ ROOF OPTION
ILLUMINATIONt
Lighting is provided by four Class I Division II, 48" long, fluorescent,
32-watt, T-8 type fixtures (four-tube), mounted behind safety glass;
appropriately sealed from the interior of the spray booth. All fixtures
are UL listed and approved for their intended use and placement.
NOTE: Lexan™ roof panels may be substituted for the light fixtures.
PURGE CONTROLt
This feature assures the safe operation of the coatings enclosure,
by maintaining the airflow at design levels. During operation overspray
powder accumulates on the cartridge filters. The term for this is
“loading”; as the cartridge filters “load”, airflow decreases and suction
pressure rises within the air handler. A timer activates a system of air
purging valves that clear the cartridge filters of accumulated powder
as needed.
POWDER BOOTH WITH COLLECTOR MODULE
SAFETY EQUIPMENT
t •t One (1) Air Interlock Solenoid Valve is provided with this booth.
t •t Filter Proving Switch is provided with this booth.
t •t Flame/Spark Detection (if required) will be provided by others.
CONTROL PANEL WITH VFD
CONSTRUCTION FEATURES AND QUALITY STANDARDS
t •t Booths are constructed from 18 gauge, prime-quality galvanized steelt
t •t All panels and support members are precision punched for easy nut and bolt assemblyt
t •t Quality brand-name plug fans and ODP motorst
t •t 5/16 inch bolts with self locking nutst
t •t Industry-leading light levelst
t •t Spray booth specific, dual voltage T-8 32-watt light fixturest
t •t Booths include installation instructions, fan, motor & drive, fasteners, hardware, and sealant necessary for assemblyt
t •t Air solenoid valve and filter proving switch includedt
t •t Stainless steel option availablet
t •t Control panel and VFD is included
COL-MET SPRAY BOOTHS COMPLY WITH ALL APPLICABLE OSHA AND NFPA REGULATIONS.