Millermatic®211 Auto-Set with MVP0 pages

Millermatic 211
®
Light Industrial Applications
Quick
Specs
Processes
Light Fabrication
Maintenance and Repair
Garage/Body Shop
Farm/Home
Auto-Set
with MVP
MIG (GMAW)
Flux Cored (FCAW)
™
MIG Arc Welding Power Source,
Wire Feeder and Gun Package
Rated Output
Input Power
230 V, 25 A, 60 Hz, Single-Phase
120 V, 20 A, 60 Hz, Single-Phase
The Power of Blue .
Issued September 2010 • Index No. DC/12.54
™
150 A at 23.5 VDC, 30% Duty Cycle (230 V)
90 A at 20 VDC, 20% Duty Cycle (120 V)
Amperage Range 30 –210 A
Max. Open-Circuit Voltage 34
®
Auto-Set™: The right steel settings automatically.
• Set the wire diameter, a blue light shows that
Auto-Set ™ is activated
• Dial in the thickness of what you’re welding
• Start welding with the exact parameters
you need!
Infinite voltage control gives you the
flexibility to manually set the machine
when welding aluminum, stainless steel,
or anytime you want to set your own
parameters on mild steel.
Welds thickest material in its class!
The Millermatic® 211 Auto-Set™ with
MVP™ has the highest output in its
class. It can weld from 24 ga – 3/8 in
(0.8 – 9.5 mm) mild steel in a single
pass on 230 V.
Comes Complete With:
Power source
6 ft (1.8 m) power cord and MVP™ plugs
10 ft (3 m) M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith® Argon and AR/CO2 mix regulator/flow
gauge with hose
Spool of Hobart® .030 in (0.8 mm) solid wire
Two contact tips for .030 in (0.8 mm) wire and
two contact tips for .035 in (0.9 mm) wire
Dual-groove quick-change drive roll for .024 in
(0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
Factory-installed gas
solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge ➤
#229 895
Note: Shielding gas and safety
equipment not included.
Spool gun ready out of the box!
Finally a reliable and economical way
to weld aluminum. Hooked up to a
Millermatic® 211 Auto-Set™ with MVP™,
the Spoolmate™ 100 Series spool gun
allows you to weld from 18 ga – 3/8 in
aluminum.
Miller’s “Tip Saver” short
circuit protection shuts
down output when tip is
shorted to the work. Extends
contact tip life and protects
internal components from
damage. Trigger reset
permits quick reset at gun
rather than unit.
Smooth-Start ™ provides a
smooth, spatter-free start. It’s
the best-starting machine in the
small MIG machine category. No pop
gun starts and virtually no spatter to
clean up.
Cable management built
into the handle.
Thermal overload protection shuts down
unit and activates over temperature light
if airflow is blocked or duty cycle is
exceeded. Automatically resets when
fault is corrected and unit cools.
Miller’s multi-voltage plug (MVP™)
allows you to connect to common
120 or 230 V power receptacles
without the use of any tools—simply
choose the plug that fits the receptacle
and connect it to the power cord.
Durable cast-aluminum drive system
incorporates dual-groove quick-change
drive roll and spring-loaded tension arm
with calibrated tension knob, all designed
to make set up easier and faster.
Uses 4 or 8 in (102 or 203 mm) spools
and can be set up to weld with wire sizes
.024–.035 in (0.6–0.9 mm) mild/stainless
steel and .030–.045 in (0.8–1.2 mm)
flux cored.
Welder is warranted for 3 years, parts and labor. Original
main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
www.MillerWelds.com