Millermatic® 180 Auto-Set0 pages

Millermatic 180 Auto-Set
Issued September 2010 • Index No. DC/12.44
®
Quick
Specs
Light Industrial Applications
Processes
Light Fabrication
Maintenance and Repair
Auto Body
Farm/Home
MIG (GMAW)
Flux Cored (FCAW)
The Power of Blue .
®
Auto-Set ™: The right settings automatically.
• Set the wire diameter, a blue light shows
that Auto-Set ™ is activated
• Dial in the thickness of what you’re welding
• Start welding with the exact parameters you need!
Infinite voltage control gives you the
flexibility to manually set the machine
when welding aluminum, stainless steel,
or anytime you want to set your own
parameters on mild steel.
Welds thickest material in its class!
The Millermatic® 180 Auto-Set™ has
the highest output in its class. It can
weld from 24 ga– 5/16 in (0.8 – 7.9 mm)
mild steel in a single pass.
™
MIG Arc Welding Power Source,
Wire Feeder and Gun Package
Input Power 230 V, 21.7 A, 60 Hz, Single-Phase
Rated Output 135 A at 22.5 VDC, 30% Duty Cycle
Amperage Range 30 –180 A
Max. Open-Circuit Voltage 31
Comes Complete With:
Power source
6 ft (1.8 m) power cord and plug
10 ft (3 m) M-100 MIG gun and cable assembly
10 ft (3 m) work cable and clamp
Smith® Argon and AR/CO2 mix regulator/flow
gauge with hose
Spool of Hobart® .030 in (0.8 mm) solid wire
Two contact tips for .024 in (0.6 mm) wire and
two contact tips for .030 in (0.8 mm) wire
Dual-groove quick-change drive roll for .024 in
(0.6 mm) or .030/.035 in (0.8/0.9 mm) wire
Factory-installed gas
solenoid valve
Set-up and operation CD
Information/settings chart
Material thickness gauge ➤
#229 895
Note: Shielding gas and safety
equipment not included.
Spool gun compatible! Finally a reliable
and economic way to weld aluminum.
Hooked up to a Millermatic® 180
,
Auto-Set™ the Spoolmate 100 Series
spool gun allows you to weld from
18 ga – 1/4 in aluminum.
Easy access to output studs provides
convenient polarity changeover when
changing from solid or flux cored wires.
Miller’s “Tip Saver” short
circuit protection shuts down
output when tip is shorted to
the work. Extends contact tip
life and protects internal
components from damage.
Trigger reset permits quick
reset at torch rather than unit.
™
Smooth-Start provides a smooth,
spatter-free start. It’s the best-starting
machine in the small MIG machine
category. No pop gun starts and no
spatter to clean up.
Durable cast-aluminum drive system
incorporates dual-groove quick-change
drive roll and spring-loaded tension arm
with calibrated tension knob, all designed
to make set up easier and faster.
Standard built-in solid-state contactor
circuit makes wire electrically “cold”
until trigger is pulled, making the unit
safer. It’s also easier to position torch
to work before starting weld.
Thermal overload protection shuts down
unit and activates over temperature light
if airflow is blocked or duty cycle is
exceeded. Automatically resets when
fault is corrected and unit cools.
Uses 4 or 8 in (102 or 203 mm)
spools and can be set up to weld with
wire sizes .024–.035 in (0.6–0.9 mm)
mild/stainless steel and .030 –.045 in
(0.8 – 1.2 mm) flux cored.
Welder is warranted for 3 years, parts and labor. Original
main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
www.MillerWelds.com