Millermatic® 350P Aluminum0 pages

Millermatic 350P Aluminum

Issued July 2012 • Index No. DC/12.56

®

Industrial Applications

Quick
Specs

Processes

Boat, Ship and Yacht Building
Recreational Vehicles
Trucks and Trailer
Sign Manufacturers
Emergency Vehicles

MIG (GMAW)
Synergic MIG (GMAW)
Synergic Pulsed MIG
(GMAW-P)

Rated Output

MIG Welding Power Source,
Wire Feeder and Gun Package

300 A at 32 VDC, 60% Duty Cycle, 60 Hz,
1- or 3-Phase Input Power

Amperage Range 25 – 400 A
Wire Feed Speed 50 – 800 IPM (1.3 – 20 m/min.) with Push-Pull Gun
Weight 181 lb. (82 kg)

The Power of Blue .

®

Superior aluminum performance.
Direct connection for Miller 10-pin
XR-Aluma-Pro™ and XR™ Pistol Grip
air-cooled push-pull guns. With Auto Gun
Detect, simply pull the trigger for the gun
to be used and you’re ready to weld.

Standard System Comes Complete with:
Power source
10-ft. (3 m) industrial power cord
(without plug)
10-ft. (3 m) work cable with clamp
Factory-installed gas solenoid
Smith® Argon mix regulator/flow gauge
with hose
Factory-installed, low-mounted running
gear/cylinder rack
.035-, .040-, and .047-in. (0.9, 1.0 and
1.2 mm) U-groove drive rolls for
aluminum welding
Setup and operation CD

Note: Not compatible with standard MIG guns.

NEW! True torque
feed motor
push-pull design
provides continuous push force to
the wire while the
gun motor controls the speed at the gun.
The motors work together to provide
accurate and positive wire feed speed
without wire shaving or deformation.
Synergic pulsed welding mode offers
the simplicity of single-knob control. The
machine will select the correct pulse power
based on the wire feed speed (WFS) set by
the operator.

NEW! Synergic MIG provides communication between power source, feeder and gun.
As wire speed increases/decreases, the arc
voltage also increases/decreases to
maintain a constant welding arc.
NEW! Trigger schedule select (SCHD)
allows the operator to select the alternative
schedule by quickly tapping the gun trigger
when not welding. Useful when switching
between two welding parameters is needed.

NEW! Trigger hold allows the operator to release
the trigger while making long continuous welds,
reducing hand and finger fatigue.
NEW! Jog and purge allow operator to jog the wire,
or purge gas lines and preset gas pressure at the
regulator before welding.

Special features
• Run-in adjustment for better starts
• Built-in two-minute spot timer
• Pre-flow and post-flow adjustment
• View actual welding amperage/voltage
during welding, and five seconds after arc
has shutoff
• SharpArc™ controls welding arc cone width
in pulsed MIG welding mode
• Inductance control customizes weld output
characteristics in MIG welding mode
Fan-On-Demand™ cooling only operates when
needed, reducing power consumption and
contaminants inside the unit.

Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.

Miller Electric Mfg. Co.

Equipment Sales US and Canada

Website

An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA

Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125

MillerWelds.com