2 Cuft Contractor Machine System with HP Respirator (Rev. G)0 pages

Description
TECHNICAL DATA SHEET

Field portable, high-production, singlechamber blast machine system, rated at
150 psi, for one operator. Holds 2 cubic
feet of blast media. Equipped with
Millennium pneumatic remote controls.
Components listed on next page.

Note: For safe, efficient blasting, read
and follow the owner's manual and seek
training for everyone who will use this
equipment.

Contractor
System 2002 CA
with Apollo 600 HP
Respirator

Stock No. 21547

2 cu ft Contractor Blast
Machine with CPF-20 Air
Filter Installed

Purpose

High-performance blast cleaning
system removes corrosion, mill scale, and
coatings from most surfaces. Produces a
uniform surface texture, and creates a
surface profile to increase bonding for
coatings. See related literature for
additional applications. Machine holds 2
cubic feet of abrasive for up to 30
minutes of continuous blasting at 100 psi
with standard No. 4 nozzle (1/4-inch
orifice).

Requirements for Operation
These items are required but not included
with this equipment.

• Clean, dry, compressed air of
sufficient volume to maintain desired
pressure at the nozzle. See Air
Consumption Chart in Blast Off 2
booklet.
• Minimum 30 psi needed to operate
OSHA-required remote control valves
• Blast suit and work boots
• Abrasive blast media - consult abrasive
supplier for appropriate media for your
application
• Compressed air source capable of
delivering 20 cfm (at 90 to 100 psi) of
Grade D breathing-air as defined by the
Compressed Gas Association
Commodity Specification: G-7.1
(www.cganet.com)

Description of Operation

The operator controls blasting from a
remote control handle at the nozzle.
Pressing the handle starts blasting,
releasing it stops blasting. The blast
machine contains abrasive and meters it
into the compressed air stream.

Advantages

• Rated for 150-psi working pressure
• 1-1/2-inch Millennium valve provides
unrestricted air flow
• Quantum metering valve maintains
smooth, consistent flow; adjustment
knob allows precise control of media
flow
• 29-inch width fits through standard
doorways with moisture separator
removed
• CPF-20 breathing air filter, installed
• Two-wheel integral cart for ease of
moving
• Robust handles act as skid for loading
machine into pickup or trailer and
protect valves and piping from
damage
• Central hookup point for blast hose and
remote controls
• High-efficiency air filter/moisture
separator helps keep abrasive dry
• Weather-resistant storage area holds
manuals, paperwork and small parts
• State-of-the-art NIOSH-approved
respirator with DLX comfort-fit
suspension.

Contractor System Accessories
and Operator Safety Equipment

Approvals and Certifications

Blast machine pressure vessel built to
American Society of Mechanical
Engineers (ASME) code for 150-psi
working pressure. Vessel is
hydrostatically tested and National Board
certified.

Apollo 600 helmet is NIOSH-approved
type-CE air fed respirator and is
recognized by OSHA as having an
assigned protection factor (APF) against
lead dust of 1000 times the permissible
exposure limit (PEL).
Remote control system complies with
OSHA regulation 1910.244 (b).

NOTE: Prior to use, ensure that Apollo,
type-CE, continuous-flow, supplied-air
respirator is appropriate for your specific
blasting conditions and requirements.