Pulsar Multichannel and Triggered USB Interfaces0 pages

2.2.2 Pulsar Multichannel and Triggered USB Interfaces
Convert your laptop or desktop PC into a multichannel power/energy meter
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
ֺ
From sensor to interface to PC
1,2 and 4 channel models
Plug and play with most Ophir sensors
Record every energy pulse at up to 25kHz
Measure missing pulses & trigger output with external trigger
Log power and energy, average, statistics, histograms and
more with included StarLab application
LabVIEW VIs, COM Object Interface and ActiveX software included
Smart Sensor to Pulsar to PC
2.2.2 Power Meters
Ophir’s 1-4 channel Pulsar interface turns your PC or laptop into
a full fledged Ophir multi-channel laser power/energy meter.
Just install the software, plug the sensor into the Pulsar and the
USB cable from the Pulsar to the PC USB port. With the Pulsar-4,
Pulsar-2 and Pulsar-1 series, you can connect up to 4 sensors to
each module, monitor each pulse at up to 25kHz and utilize
external trigger.
Pulsar-4 operating with StarLab software
LabVIEW
Specifications
Power Measurement
Power log period
Energy Measurement
Max real time data logging to PC
Trigger input and output
Timing
General
Number of sensors supported
Compatible sensors
Power supply
Dimensions
Notes: (a)
Notes: (b)
5s to 500hr.
25,000Hz (a)
BNC trigger input to enable measurement of missing pulses or to select specific pulses. Can also be configured to give trigger output
Supports time stamp for each pulse - resolution 1μs
4 / 2 / 1 sensors per unit. Can combine several units with software for display of up to 8 sensors on one PC
Supports all standard Ophir pyroelectric, thermal and photodiode sensors (b)
12V wall cube power supply plugs into jack on rear
189 x 103 x 33mm
Limited by the maximum repetition rate of the sensor. At present only the PE9-F can operate up to 25000Hz
Not including RP sensors, PD300-CIE, BC20 and PD300-BB
Ordering Information
Item
Pulsar-4
Description
Module to operate up to 4 Ophir sensors from your PC USB port. Comes with software. Max repetition rate for every
pulse 25kHz. Has external trigger capability. Powered from supplied wall cube power supply
Same as above but for 2 channels only
Pulsar-2
Pulsar-1
Same as above but for 1 channel only
USB Interface (USBI) Legacy smart sensor to USB interface with similar performance to Juno but larger size. Has analog output. See summary
legacy
page 100 for specifications
98
01.01.2012
For latest updates please visit our website: www.ophiropt.com/photonics
Ophir P/N
7Z01201
7Z01202
7Z01203
7Z01200