Standard OEM Pyroelectric Energy Sensors0 pages

1.3.7.1 Standard OEM Pyroelectric Energy Sensors
2µJ to 20mJ
1.3.7.1 Sensors
Features
ֺ
ֺ Compact
ֺ
ֺ Low Profile
ֺ
ֺ Low Cost
PE10-S
PE10-S-Q
The following specifications refer to standard OEM sensors, and are to be understood as generic, describing sensor families.
Ophir will be happy to help you with a specific solution for your particular application.
Model
Features
PE10-S
High sensitivity and rep rate
PE10-S-Q
Very compact
Aperture mm
Absorber Type
Spectral Range µm (a)
Surface Reflectivity % approx.
Calibration Accuracy +/-% (a)
Sensitivity (approx) at 1064nm
Max Pulse Width (b)
Maximum Pulse Rate pps (b)
Maximum Energy
Minimum Energy
Noise Equivalent Energy, approx
Output
Damage Threshold J/cm2
<100nm
1µs
300µs
Maximum Average Power W
Maximum Average Power Density W/cm2
Dimensions
Part Number
12
Metallic
0.19-3
50
3
100V/J into 1MΩ
25us
400
20mJ
2µJ
100nJ
BNC
8
Metallic
0.19-3
50
3
15V/J into 1MΩ and 5nF load
500us
100
20mJ
2µJ
100nJ
Flying Leads
0.1
0.2
4
2
50
Ø50.8 x 14mm
Consult Ophir representative
0.1
0.2
4
2
50
30 x 40 x 14mm
Consult Ophir representative
Notes: (a)
Notes: (b)
PE10-S
At calibrated wavelength, standard 1064nm. Others on request.
There is a trade off between repetition rate, sensitivity and maximum pulse width. If standard
products are not suitable, these parameters can be tailored to customer requirements.
PE10-S-Q
78
01.01.2012
For latest updates please visit our website: www.ophiropt.com/photonics