عضویت 
ورود اعضا
راهنمای خرید
Pharma-line0 pages
The Pharma-line is a high-quality shell & tube heat exchanger especially developed to meet the high hygienic demands of the pharmaceutical industry. The design of the Pharma-line makes it easy to drain and clean, and there is no risk of
cross-contamination associated with conventional heat exchangers. The documentation on a heat exchanger in
the pharmaceutical industry is equally important as the hardware
so the Pharma-line comes together with a high quality documentation package as standard and most specials
are available upon request.
Applications
The Pharma-line is designed to work under highest hygienic conditions in applications such as WFI, PW and heating/
cooling of pharmaceutical products.
Design and working principles
The product media flows through a bundle of seamless,
electropolished tubes. The service media flows outside the tubes in cross flow. At the end the tubes are fastened by two tube sheets (see Fig. 1) acting as leakage indicators and prevent cross-contamination between the product and the service media.
The Pharma-line can be installed either horizontally or vertically
depending on the duty or space. For an easy installation, lifting and mounting devices are welded on the unit. Thermal fatigue caused by large temperature changes is taken up
by the U-bend in two-pass units and by a welded-in bellow
in straight units.
Special features
• Seamless tubes
• Double tube-sheets to protect against service media
leaking into the product
• Completely drainable on product side
• No dead spots in the tubes
• Designed according to FDA and cGMP requirements
• Flexibility in design
Standard range
A standard range of U-tube designed Pharma-line that suit most applications is available.
Pharma-line
Sanitary shell & tube heat exchanger
Fig. 1. Double tube sheets prevents cross-contamination between the product and the heating/cooling media.
Tube sheets
