TS6 Plate heat exchanger0 pages
TS6
TS6-MFG
Plate heat exchanger
Applications
General heating and cooling duties. Heating by means of
steam.
Standard design
The plate heat exchanger consists of a pack of corrugated
metal plates with portholes for the passage of the two fl uids
between which heat transfer will take place.
The plate pack is assembled between a fi x frame plate and a
movable pressure plate and compressed by tightening bolts.
The plates are fi tted with a gasket which seals the interplate
channel and directs the fl uids into alternate channels. The
number of plates is determined by the fl ow rate, physical
properties of the fl uids, pressure drop and temperature program.
The plate corrugations promote fl uid turbulence and
support the plates against differential pressure.
The plate and the pressure plate are suspended from an
upper carrying bar and located by a lower guiding bar, both
of which are fi xed to a support column.
Connections are located in the frame plate or, an additional
auxiliary connection for steam may be mounted on the pressure
plate to handle high capacities.
Typical capacities
Liquid fl ow rate
Up to 20 kg/s (300 gpm), depending on media, permitted
pressue drop and temperture program.
Water heating by steam
200-1800 kW
Plate types
TS6M
Frame types
FG and FD