1_INNOKEG AK 4-1 BIS 10-2
EXTERNAL WASHER FOR STANDARD KEGS IN THE MEDIUMAND HIGH-CAPACITY RANGE (UP TO 1,300 KEG/H)

Requirements and Solutions
 
Modular high-performance external washer for all
keg and container types. Designed according to
the modular component principle, with a capacity
of upto 1,300 kegs/h depending on configuration
(upto 10 handling segments).
The use of brushes for side cleaning and high
pressure spraying for the keg fitting area ensures
the effective removal of labels and heavy soiling.
Each keg runs through the external washer on
conveyor belts, while being intensively cleaned by a
spray nozzle system and then cleared of any
adherent cleaning agent by a sensor-controlled
fresh water spray.
 

Key Features
 
· The external keg cleaner AK series is comprised
of modular components and can consequently
be designed for various capacity and cleaning
requirements.
· Drawer sieve made from perforated sheet metal
for collecting coarse soiling such as labels.
· A dirt trap in the pressure line ensures maximum
operational reliability in the system.
· Self-closing doors in infeed and discharge.
· All function buttons, switches and indicator
lamps are integrated into the control boxes; all
operating conditions as well as operating modes
can be adjusted here. Faults which occur are
indicated by warning lights.

KEG PROCESSING

Standard Equipment
 
· This compact machine is manufactured from
steel (1.4301 (304))
· The lower part of the housing serves as a drip
pan for cleaning media (one each per bath).
· Available in versions with either Siemens or
AllenBradley controls
· Control units, low-voltage power distribution
and wiring are located in a splashproof control
box made of stainless steel.
· A fluid sensor is located on the sides of each of
the pans for monitoring the bath level.
· They ensure sufficient fill height in the bath and
prevent the cleaning agent pumps from running
dry.
· The bath is automatically heated by a
thermostat-controlled heating coil.