SW68P Double Pole Single Throw Normally Open - IP660 pages
SW68P Double Pole Single Throw Normally Open - IP66
(Part of the SW60 Series)
80A
The SW68P is a miniature series double pole, free standing, compact contactor which is sealed to IP66. The
SW68P is designed to fill the gap between 30 ampere relays and 100 ampere contactors. Devised for both
interrupted and uninterrupted loads, the SW68P is suitable for switching Resistive, Capacitive and Inductive
loads. Typical applications include switching small traction motors, hydraulic power packs and small electric
winch motors.
•t
Interrupted current - opening and closing on load with frequent switching (results in increased contact resistance).
•t
Uninterrupted current - no or infrequent load switching requirements (maintains a lower contact resistance).
Application
Interrupted
Uninterrupted
Thermal Current Rating (Ith)
80A
Intermittent Current Rating:
30% Duty
145A
40% Duty
125A
50% Duty
115A
60% Duty
105A
70% Duty
The SW68P features double pole double breaking main
contacts with silver alloy tips, which are weld resistant,
hard wearing and have excellent conductivity. The SW68P
incorporates an enclosed top cover and offers environmental
protection to IP66. The SW68P has M6 stud main terminals and
6.3mm spade coil connections. It can be mounted via mounting
brackets (supplied fitted). Mounting can be on the side or base
of the contactor.
95A
SW68P
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant:
(in accordance with UL583*)
SW68P
400A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load:
(in accordance with UL508*)
SW68P
120A at 60V D.C.
Maximum Recommended Contact Voltages (Ue):
SW68P
96V D.C.
Typical Voltage Drop per pole
across New Contacts at 80A
<40mV
Mechanical M.T.B.F
>3 x 106
Coil Voltage Available (Us)
From 6 to 130V D.C.
Coil Power Dissipation:
Highly Intermittent Rated Types
14 - 21 Watts
Intermittently Rated types
10 - 14 Watts
Prolonged Rated Types
7 - 10 Watts
Continuously Rated Types
5 - 7 Watts
Maximum Pull-In Voltage (Coil at 20˚ C) Guideline:
60% Us
60% Us
60% Us
66% Us
Advised Connection Sizes for Maximum Continuous Current
Cable
Key:
●
Magnetic Latching† (Not fail safe)
Closed Contact Housing
52mm2 [0.081inch2]
Environmentally Protected IP66
Current (Amperes)
Contact Performance Key:
Interrupted and
Uninterrupted Current
Rated suitable for Application
= Interrupted
= Uninterrupted
Note: Where applicable values shown are at 20˚C
* Please check our web site for product UL status
•t
•t
•t
•t
v1-06-13
Performance data provided should be used as a guide only. Some de-rating or variation
from figures may be necessary according to application.
Thermal current ratings stated are dependant upon the size of conductor being used
For further technical advice email: technical@albrightinternational.com
Albright reserve the right to change data without prior notice
Connection Diagram
40
0
0
225 gms
Copper busbar
300
0
Guideline Contactor Weight:
SW68P
X
Mounting Brackets
(See Stud Range Catalogue)
400
35
0
3ms
- 40˚C to + 60˚C
X
Armature Cap
500
30
0
8 - 20ms
Operating Ambient Temperature
X
Magnetic Blowouts - High Powered†
600
25
0
35ms
Typical Contact Bounce Period
X
Magnetic Blowouts†
Figures are for guideline
purposes only
700
0
Time (Seconds)
6ms
With Diode and Resistor
(Subject to resistance value)
Auxiliary Contacts - V4
100
Typical Drop-Out Time (N/O Contacts to Open):
With Diode Suppression
X
200
15ms
Without Suppression
Suffix
Auxiliary Contacts
800
10 - 25% Us
Typical Pull-In Time
General
900
20
Drop-Out Voltage Range
Dimensions in mm [inches]
SW68P Available Options
SW68P Contactor Performance
0
Continuously Rated Types
(100% Duty Cycle)
15
Prolonged Operation
(Max 90% Duty Cycle)
See Stud Contactor Range Catalogue for alternative bracket mounting positions
10
0
Intermittently Rated types
(Max 70% Duty Cycle)
50
Highly Intermittent Rated types
(Max 25% Duty Cycle)
○
●
●
EE Type (Steel Shroud)
X
M
P
Contacts
Large Tips
X
Textured Tips
X
Silver Plating
X
Coil
AC Rectifier Board (Fitted)
X
Coil Suppression†
○
Flying Leads
X
Manual Override Operation
X
M4 Stud Terminals
○
M5 Terminal Board
X
Vacuum Impregnation
X
Key: Optional ○ Standard ● Not Available X
†
Connections become polarity sensitive
Albright International Ltd, Evingar Trading Estate, Ardglen Road, Whitchurch, Hampshire, RG28 +44 UK
Albright International, 125 Red Lion Road, Surbiton, Surrey KT6 7QS, England,Tel: +44 (0) 20 8390 5357, Fax:7BB,(0) 20 8390 1927
Tel: sales@albrightinternational.com or technical@albrightinternational.com Web 890030, Fax: +44 (0)1256 890043
E-mail: +44 (0)1256 893060, Fax: +44 (0)1256 893562, Dedicated Sales Tel: +44 (0)1256 Site: www.albrightinternational.com
E-mail: sales@albrightinternational.com or technical@albrightinternational.com Web Site: www.albrightinternational.com
Copyright © 2010 Albright International Ltd
Copyright © 2013 Albright International LTD
SW68P
"