TEMPERATURE-CONTROLLER MCS15+0 pages
Temperature Controller MCS15+
TYP 03.31.15 +
The external bus interface
1. Introduction
The enhancement of the economicalness and the
flexibility of our hot-channel controllers is a permanent
task. Close relations to our customers in synthetic
materials industry enable us to discuss, define and to
realize new features.
The result is the MCS+ series additional to the series
MCS. A special feature: the controllers e.g. MCS10+
or MCS15+ are fit simply stacking of max. 6 units will
allow to build controllers with up to 90 control loops.
The external bus interface serves common features
like leakage current detection, combined heating etc.
The number of channels may increase in steps of
max. 15 according to the tool. So the number of
unused channels may be reduced to a minimum and
even be used for another tool.
2. Short Description
All MCS+ devices that should be connected to
one control unit are stacked.
This enables a
robust mechanical
unit. The external
bus interface has
seperate input (MCS
IN) and output (MCS
OUT) plugs at the
rear panel. The
output of the upper
device is connected
to the input of the
lower device
(interface cables
are supplied with
the devices). For a
complete unit all
devices have to be
linked this way.
A code switch on the rear panel sets the
internal ranking of the "new" controller unit. The
devices must be adressed in consecutive order
beginning with "0". The "0" device is the
master. All operation is done by the master. The
operation panels of the salves "1", "2" a.s.o.
are disable.
To ensure, that the master may detect all
slaves of the compute unit, the master has to
be switched on at last.
All other features of the series MCS (electrical,
mechanical and control specifications) are
available in the MCS product information.
IIMIIIIIIIIIIIII
Typ033115+eng - 05.12.07
EITEC
"